Start Page › Old Vehicle Part Search
Alle Ersatz-& Verschleißteile passend für FORD C-MAX (DM2) 1.6
ABS Sensors (4)
Art. No . : 86610
MAPCO 86610 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Supplementary Article/Info 2: without cable
- Required quantity: 2
- Construction year from: 2007/03
Braking / Drive Dynamics: for vehicles without ESP
To the price display, please log in
Art. No . : 86610/2
MAPCO 86610/2 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle left and right
- Required quantity: 1
- Construction year from: 2007/03
Braking / Drive Dynamics: for vehicles without ESP
To the price display, please log in
Art. No . : 86611
MAPCO 86611 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: without cable
- Required quantity: 2
- Construction year from: 2007/03
To the price display, please log in
Art. No . : 86611/2
MAPCO 86611/2 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Rear Axle left and right
- Required quantity: 1
- Construction year from: 2007/03
To the price display, please log in
Accessories (1)
Art. No . : 76999
MAPCO 76999 TEST UNIT, SENSOR RING
Manufacturer: MAPCO
To the price display, please log in
Alternator (1)
Art. No . : 13602
MAPCO 13602 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Voltage: 14,0 V
- Alternator Charge Current: 105,0 A
- Number of ribs: 6
- Belt Pulley Ø: 48 mm
- Pulleys: with v-ribbed belt pulley
- Vehicle Main Current: for vehicles with 12V main current
- New part without deposit
To the price display, please log in
Ball Joint (1)
Art. No . : 52606
MAPCO 52606 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Lower
- Cone Size: 18,0 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Bellow Steering (1)
Art. No . : 29997/1
MAPCO 29997/1 BELLOW SET, STEERING
Manufacturer: MAPCO
Product Info:
- Inner diameter 1: 10,0 mm
- Inner diameter 2: 27,0 mm
- Height: 17,0 mm
To the price display, please log in
Brake Calipers/ Carrier (4)
Art. No . : 4772
MAPCO 4772 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Piston Diameter: 57 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: ATE
- New part without deposit
- Paired article numbers: 4773
- Brake Disc Type: Vented
Wheelbase: Short Wheelbase
To the price display, please log in
Art. No . : 4773
MAPCO 4773 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Piston Diameter: 57 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: ATE
- New part without deposit
- Paired article numbers: 4772
To the price display, please log in
Art. No . : 4776
MAPCO 4776 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Piston Diameter: 38 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: ATE
- New part without deposit
- Paired article numbers: 4777
To the price display, please log in
Art. No . : 4777
MAPCO 4777 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Piston Diameter: 38 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: ATE
- New part without deposit
- Paired article numbers: 4776
To the price display, please log in
Brake Discs (4)
Art. No . : 25815
MAPCO 25815 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Outer diameter: 265 mm
- Height: 40,8 mm
- Brake Disc Type: Solid
- Brake Disc Thickness: 11.0 mm
- Number of Holes: 5
- Centering Diameter: 63,5 mm
- Bolt Hole Circle Ø: 108 mm
To the price display, please log in
Art. No . : 25817
MAPCO 25817 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Outer diameter: 280 mm
- Brake Disc Thickness: 11.0 mm
- Minimum thickness: 9 mm
- Height: 41 mm
- Bore Ø: 13,7 mm
- Inner diameter: 192 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 108 mm
- Centering Diameter: 63,5 mm
- Construction year from: 2007/03
Fits rim size [inch]: 17
To the price display, please log in
Art. No . : 25826
MAPCO 25826 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Number of Holes: 5
- Bolt Hole Circle Ø: 108 mm
- Outer diameter: 278,0 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 23 mm
- Height: 48,5 mm
- Inner diameter: 140 mm
- Bore Ø: 13,7 mm
- Centering Diameter: 63,5 mm
- Construction year from: 2007/03
To the price display, please log in
Art. No . : 25826C
MAPCO 25826C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 278 mm
- Brake Disc Thickness: 25 mm
- Minimum thickness: 23 mm
- Height: 48,5 mm
- Inner diameter: 140 mm
- Bore Ø: 13,7 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 108 mm
- Centering Diameter: 63,5 mm
- Construction year from: 2007/03
To the price display, please log in
Brake Fluid (2)
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Brake Hoses (1)
Art. No . : 3703
MAPCO 3703 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Length: 395 mm
- Spanner Size: 14/17
- Construction year from: 2007/03
To the price display, please log in
Brake Kits (4)
Art. No . : 47660
MAPCO 47660 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 278 mm
- Brake Disc Thickness: 25,0 mm
- Minimum thickness: 23 mm
- Height: 48,5 mm
- Inner diameter: 140 mm
- Bore Ø: 13,7 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 108 mm
- Centering Diameter: 63,5 mm
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 62,4 mm
- Width 2: 156,3 mm
- Height 2: 67 mm
- Brake Disc Thickness: 18,1 mm
- Wear Warning Contact: not prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
To the price display, please log in
Art. No . : 47660HPS
MAPCO 47660HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Surface: Coated
- Outer diameter: 278 mm
- Brake Disc Type: Vented
- Brake Disc Thickness: 25 mm
- Inner diameter: 140 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 108 mm
- Centering Diameter: 63,5 mm
- Required quantity: 1
- Quality: HPS standard
To the price display, please log in
Art. No . : 47664
MAPCO 47664 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Outer diameter: 265,0 mm
- Number of Holes: 5,0
- Brake System: ATE
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Brake Disc Type: Solid
- Brake Disc Thickness: 11 mm
To the price display, please log in
Art. No . : 47909
MAPCO 47909 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Brake Disc Type: Solid
- Outer diameter: 280 mm
- Brake Disc Thickness: 11 mm
- Number of Holes: 5
- Quality: Kreuzschliff
- Supplementary Article/Info 2: with anti-squeak plate
- Brake System: ATE
- Fitting Position: Rear Axle
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Construction year from: 2007/03
To the price display, please log in
Brake Pads (3)
Art. No . : 6698
MAPCO 6698 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Brake System: ATE
- Fitting Position: Rear Axle
- Thickness: 16,6 mm
- Width: 123,1 mm
- Height: 52 mm
- Supplementary Article/Info 2: with anti-squeak plate
- Wear Warning Contact: excl. wear warning contact
- Construction year from: 2007/03
To the price display, please log in
Art. No . : 6709
MAPCO 6709 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Brake System: ATE
- Fitting Position: Front Axle
- Thickness: 17,5 mm
- Width: 155,1 mm
- Width 2: 156,3 mm
- Height: 62,4 mm
- Height 2: 67,0 mm
- Supplementary Article/Info 2: with anti-squeak plate
- Construction year from: 2007/03
To the price display, please log in
Art. No . : 6709HPS
MAPCO 6709HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 62,4 mm
- Width 2: 156,3 mm
- Height 2: 67,0 mm
- Thickness: 18,1 mm
- Wear Warning Contact: excl. wear warning contact
- Construction year from: 2007/03
To the price display, please log in
Bushings (8)
Art. No . : 33678
MAPCO 33678 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for trailing arm
- Outer diameter: 60 mm
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 33678/2
MAPCO 33678/2 REPAIR KIT, LINK
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for trailing arm
- Quantity Unit: Set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Outer diameter: 60 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 33678/3
MAPCO 33678/3 REPAIR KIT, LINK
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for trailing arm
- Quantity Unit: Set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Outer diameter: 60 mm
- Supplementary Article/Info 2: with lock screw set
- Required quantity: 1
To the price display, please log in
Art. No . : 36622
MAPCO 36622 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Fitting Position: Lower
- Fitting Position: Front
- Inner diameter: 14 mm
- Outer diameter: 46 mm
- Outer diameter: 41 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 36628
MAPCO 36628 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Fitting Position: Lower
- Fitting Position: Rear
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 36639
MAPCO 36639 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Rear Axle left and right
- Inner diameter: 15 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 36645
MAPCO 36645 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Front Axle left and right
- Inner diameter: 18,0 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 53665
MAPCO 53665 REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Inner diameter: 18 mm
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
To the price display, please log in
CV Boot Kit (14)
Art. No . : 17983
MAPCO 17983 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 94 mm
To the price display, please log in
Art. No . : 17984
MAPCO 17984 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 110 mm
To the price display, please log in
Art. No . : 17988
MAPCO 17988 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Diameter from: 25,0 mm
- Diameter to: 125,0 mm
- Scope: 100,0 mm
- Quantity Unit: Piece
- Required quantity: 1
To the price display, please log in
Art. No . : 17988/10
MAPCO 17988/10 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
- Manufacturer Restriction: 10 Stück im Beutel
To the price display, please log in
Art. No . : 17988/50
MAPCO 17988/50 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
To the price display, please log in
Art. No . : 17988/9
MAPCO 17988/9 CLAMPING PLIERS, BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 17991
MAPCO 17991 BELLOW, DRIVESHAFT
Manufacturer: MAPCO
Product Info:
- Height: 145 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: Für PKW
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Central Slave Cylinder & Releaser (1)
Art. No . : 12654
MAPCO 12654 CENTRAL SLAVE CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Operating Mode: Hydraulic
- Bore Ø: 28 mm
- Construction year to: 2007/12
Transmission Type: MTX5
---------
Construction year from: 2007/12
Construction year to: 2010/07
Transmission Type: B5 / IB5
To the price display, please log in
Chemical Products (4)
Art. No . : 17987
MAPCO 17987 UNIVERSAL LUBRICANT
Manufacturer: MAPCO
Product Info:
- Packing Type: Spraycan
- Chemical Properties: Silicon-free
- Chemical Properties: Thin
- Quantity Unit: Tin
- Manufacturer Restriction: Montage-Spray
- Supplementary Article/Info 2: with PTFE (polytetrafluoroethylene)
To the price display, please log in
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 99134
MAPCO 99134 REFRIGERANT, AIR CONDITIONING
Manufacturer: MAPCO
Product Info:
- Refrigerant: R 134a
- Contents: 12 kg
- New Part
To the price display, please log in
Clutch & Clutch Components (1)
Art. No . : 10600
MAPCO 10600 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Used part return not required
- Diameter: 220 mm
- Number of Teeth: 17
- Hub Profile: 17x20
- Multi-piece: Two-piece
To the price display, please log in
Clutch Repair Kits (1)
Art. No . : 10600
MAPCO 10600 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Used part return not required
- Diameter: 220 mm
- Number of Teeth: 17
- Hub Profile: 17x20
- Multi-piece: Two-piece
To the price display, please log in
Engine & Gearbox Mountings (3)
Art. No . : 33686
MAPCO 33686 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Upper Right
- Required quantity: 1
To the price display, please log in
Art. No . : 36653
MAPCO 36653 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Right
- Mounting Type: Rubber-Metal Mount
- Required quantity: 1
To the price display, please log in
Art. No . : 37612
MAPCO 37612 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Left
- Fitting Position: Transmission End
- Required quantity: 1
To the price display, please log in
Engine Timing Components (1)
Art. No . : 43629
MAPCO 43629 TIMING BELT
Manufacturer: MAPCO
Product Info:
- Number of Teeth: 117
- Width: 22 mm
- Driven Units: Driven unit: camshaft
To the price display, please log in
Exhaust Silencers & Mountings (38)
Art. No . : 30200
MAPCO 30200 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Left and right
- Material: Stainless Steel
- Pipe Connector: Flexible
- Inner diameter: 42 mm
- Outer diameter: 67 mm
- Length: 94 mm
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 274 mm
To the price display, please log in
Art. No . : 30200/5
MAPCO 30200/5 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/7
MAPCO 30200/7 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/9
MAPCO 30200/9 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30201
MAPCO 30201 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 390 mm
- Outer diameter: 67 mm
- Inner diameter: 42 mm
- Length: 262 mm
To the price display, please log in
Art. No . : 30202
MAPCO 30202 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Material: Stainless Steel
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Overall Length: 274 mm
- Length: 94 mm
To the price display, please log in
Art. No . : 30203
MAPCO 30203 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Inner diameter: 45,5 mm
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 290 mm
- Length: 150 mm
To the price display, please log in
Art. No . : 30204
MAPCO 30204 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Length: 190 mm
- Overall Length: 360 mm
To the price display, please log in
Art. No . : 30205
MAPCO 30205 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Length: 240 mm
- Overall Length: 410 mm
- Material: Stainless Steel
To the price display, please log in
Art. No . : 30206
MAPCO 30206 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with connecting pipe
- Pipe Connector: Flexible
- One-sided / Double-sided: Left and right
- Material: Stainless Steel
- Inner diameter: 50 mm
- Outer diameter: 77 mm
- Overall Length: 390 mm
- Length: 250 mm
To the price display, please log in
Art. No . : 30207
MAPCO 30207 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 48,0 mm
- Length 1: 100 mm
- Length 2: 270 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30208
MAPCO 30208 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Inner diameter: 50,5 mm
- Overall Length: 280 mm
- Length: 100,0 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30209
MAPCO 30209 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length 1: 190 mm
- Length 2: 360 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30210
MAPCO 30210 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 52 mm
- Outer diameter: 77 mm
- Length: 150 mm
- Overall Length: 290 mm
- One-sided / Double-sided: Left and right
To the price display, please log in
Art. No . : 30211
MAPCO 30211 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length 1: 105 mm
- Length 2: 285 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30212
MAPCO 30212 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length 1: 195 mm
- Length 2: 365 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30213
MAPCO 30213 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 52,0 mm
- Length 1: 105 mm
- Length 2: 275 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30214
MAPCO 30214 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60,0 mm
- Length 1: 120 mm
- Length 2: 300 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30215
MAPCO 30215 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length 1: 100 mm
- Length 2: 185 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30216
MAPCO 30216 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30217
MAPCO 30217 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30218
MAPCO 30218 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30219
MAPCO 30219 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 230 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30220
MAPCO 30220 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30221
MAPCO 30221 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30222
MAPCO 30222 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30223
MAPCO 30223 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 250 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30224
MAPCO 30224 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30225
MAPCO 30225 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30226
MAPCO 30226 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 280 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30227
MAPCO 30227 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30228
MAPCO 30228 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Specification: interlock
- Diameter: 60 mm
- Length: 150 mm
To the price display, please log in
Art. No . : 30230
MAPCO 30230 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Outer diameter: 54,0 mm
- Outer diameter 1: 45 mm
- Outer diameter 2: 48 mm
- Overall Length: 400 mm
- Length: 105 mm
To the price display, please log in
Art. No . : 30232
MAPCO 30232 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Length: 100 mm
- Pipe Ø: 55,0 mm
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30232/3
MAPCO 30232/3 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Multi-piece: Three-piece
To the price display, please log in
Art. No . : 30233
MAPCO 30233 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 200 mm
- Supplementary Article/Info 2: without connecting pipe
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30234
MAPCO 30234 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 70 mm
- Length: 100 mm
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30242/3
MAPCO 30242/3 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Multi-piece: Three-piece
To the price display, please log in
Filters & Filter Kits (10)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 126 mm
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 61458
MAPCO 61458 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Outer diameter: 76 mm
- Inner diameter 1: 62 mm
- Inner diameter 2: 71 mm
- Height: 79 mm
- Thread Size: 3/4-16 UNF
To the price display, please log in
Art. No . : 61459/10
MAPCO 61459/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Required quantity: 1
To the price display, please log in
Art. No . : 61601
MAPCO 61601 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 1,0 bar
- Outer diameter: 76 mm
- Outer diameter 2: 72 mm
- Inner diameter 2: 63 mm
- Height: 75 mm
To the price display, please log in
Art. No . : 61601/10
MAPCO 61601/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 61601/5
MAPCO 61601/5 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Supplementary Info: with oil drain plug
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 67606
MAPCO 67606 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Charcoal Filter
- Length: 240 mm
- Width: 209 mm
- Height: 34 mm
- Fitting Position: Interior
Heating/Cooling: for aircon control
Heating/Cooling: for vehicles with charcoal filter
To the price display, please log in
Fuel Pumps (1)
Art. No . : 22789
MAPCO 22789 FUEL PUMP
Manufacturer: MAPCO
Product Info:
- Operating Mode: Electric
- Supplementary Article/Supplementary Info: with fuel sender unit
To the price display, please log in
HPS Brake Pads (1)
Art. No . : 6709HPS
MAPCO 6709HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Brake System: ATE
- Width 1: 155,1 mm
- Height 1: 62,4 mm
- Width 2: 156,3 mm
- Height 2: 67,0 mm
- Thickness: 18,1 mm
- Wear Warning Contact: excl. wear warning contact
- Construction year from: 2007/03
To the price display, please log in
HPS Coupling Rods (2)
Art. No . : 51610HPS
MAPCO 51610HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 78,0 mm
- Thread Size: M10x1,5
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 59664HPS
MAPCO 59664HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 298 mm
- Thread Size: M10x1,5
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
HPS Wiper Blades (1)
Art. No . : 104650HPS
MAPCO 104650HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Quantity Unit: Piece
- Wiper blade type: Hybrid Wiper Blade
- Length: 650 mm
- Fitting Position: Driver side
To the price display, please log in
Hydraulic Filters (4)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 126 mm
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Ignition Coils & Ignition Modules (1)
Art. No . : 80754
MAPCO 80754 IGNITION COIL
Manufacturer: MAPCO
Product Info:
- Number of pins: 3
- Required quantity: 1
To the price display, please log in
Interior Filter (1)
Art. No . : 67606
MAPCO 67606 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Charcoal Filter
- Length: 240 mm
- Width: 209 mm
- Height: 34 mm
- Fitting Position: Interior
Heating/Cooling: for aircon control
Heating/Cooling: for vehicles with charcoal filter
To the price display, please log in
Joint Kit Drive Shaft (7)
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: Für PKW
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Mounting Propshaft (1)
Art. No . : 77600
MAPCO 77600 INTERMEDIATE BEARING, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Width: 19,0 mm
- Inner diameter: 45 mm
- Outer diameter: 75 mm
To the price display, please log in
Oil Filter (5)
Art. No . : 61458
MAPCO 61458 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Outer diameter: 76 mm
- Inner diameter 1: 62 mm
- Inner diameter 2: 71 mm
- Height: 79 mm
- Thread Size: 3/4-16 UNF
To the price display, please log in
Art. No . : 61459/10
MAPCO 61459/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Required quantity: 1
To the price display, please log in
Art. No . : 61601
MAPCO 61601 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 1,0 bar
- Outer diameter: 76 mm
- Outer diameter 2: 72 mm
- Inner diameter 2: 63 mm
- Height: 75 mm
To the price display, please log in
Art. No . : 61601/10
MAPCO 61601/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 61601/5
MAPCO 61601/5 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Supplementary Info: with oil drain plug
- Multi-piece: Multi-piece
To the price display, please log in
Power Steering Pumps (1)
Art. No . : 27647
MAPCO 27647 HYDRAULIC PUMP, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Operating Mode: Hydraulic
- Pulleys: with multi-belt pulley
- Belt Pulley Ø: 123 mm
- Number of ribs: 6
- Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
To the price display, please log in
Repair Kit Stabilizer Suspension (1)
Art. No . : 53665
MAPCO 53665 REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Inner diameter: 18 mm
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
To the price display, please log in
Rod Strut Stabiliser (4)
Art. No . : 51610HPS
MAPCO 51610HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 78,0 mm
- Thread Size: M10x1,5
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 54612
MAPCO 54612 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Length: 110 mm
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 54612/2
MAPCO 54612/2 REPAIR KIT, STABILISER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Length: 110 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 59664HPS
MAPCO 59664HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 298 mm
- Thread Size: M10x1,5
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Rubber Pad Trolley Jack & Lifting Platforms (1)
Art. No . : 39999
MAPCO 39999 SUPPORT PLATE, MOBILE JACK
Manufacturer: MAPCO
Product Info:
- Material: Elastomer
- Outer diameter: 65 mm
- Height: 25 mm
To the price display, please log in
Screw Nuts Small Parts (1)
Art. No . : 26754/9
MAPCO 26754/9 SCREW
Manufacturer: MAPCO
Product Info:
- Length: 72 mm
- External Thread: M16 x 1,5 mm
- Quality/ Grade: 8.8
- Bolt Head-/Nut Design: Hexagon Socket
- Fitting Position: Front Axle
To the price display, please log in
Sealing Plug Oil Sump & Kits (2)
Art. No . : 95941
MAPCO 95941 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Thread Size: M14x1,5
- Thread Length: 13,5 mm
- Length: 13.5 mm
To the price display, please log in
Art. No . : 95941/5
MAPCO 95941/5 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Five-piece
To the price display, please log in
Sensor Coolant Temperature (1)
Art. No . : 88606
MAPCO 88606 SENDER UNIT, COOLANT TEMPERATURE
Manufacturer: MAPCO
Product Info:
- Thread Size: NPT 3/8
- Colour: Grey
- Number of connectors: 2,0
To the price display, please log in
Shock Absorbers (6)
Art. No . : 40640
MAPCO 40640 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle Left
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Paired article numbers: 40641
- Replace in pairs only
To the price display, please log in
Art. No . : 40640/1
MAPCO 40640/1 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
To the price display, please log in
Art. No . : 40641
MAPCO 40641 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle Right
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Paired article numbers: 40640
- Replace in pairs only
To the price display, please log in
Art. No . : 40642
MAPCO 40642 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom eye
- Replace in pairs only
To the price display, please log in
Art. No . : 40642/2
MAPCO 40642/2 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Absorber does not carry a spring
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom eye
- Required quantity: 1
To the price display, please log in
Art. No . : 40940
MAPCO 40940 MOUNTING KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Set
- Fitting Position: Front Axle
- Supplementary Article/Info 2: with suspension strut support mount
- Supplementary Article/Info 2: with rolling bearing
- Required quantity: 1
To the price display, please log in
Spring Repair Kit Drum Brakes (1)
Art. No . : 9605
MAPCO 9605 ACCESSORY KIT, DISC BRAKE PADS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake System: ATE
- Multi-piece: Two-piece
- Trim Level: Drahtfeder
To the price display, please log in
Starter (1)
Art. No . : 13650
MAPCO 13650 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12 V
- Number of Teeth: 10
- Rated Power: 1,1 kW
- Plug Type ID: 30, 50
- Thread Size: M10
- Number of Holes: 3
- Position / Degree: re 29
- Rotation Direction: Clockwise rotation
- Flange Ø: 76,2 mm
- Number of thread bores: 3,0
- Number of mounting bores: 3
- Construction year from: 2007/03
Construction year to: 2009/04
To the price display, please log in
Starters Alternators (1)
Art. No . : 13650
MAPCO 13650 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12 V
- Number of Teeth: 10
- Rated Power: 1,1 kW
- Plug Type ID: 30, 50
- Thread Size: M10
- Number of Holes: 3
- Position / Degree: re 29
- Rotation Direction: Clockwise rotation
- Flange Ø: 76,2 mm
- Number of thread bores: 3,0
- Number of mounting bores: 3
- Construction year from: 2007/03
Construction year to: 2009/04
To the price display, please log in
Steering & Suspension Parts (16)
Art. No . : 33678/2
MAPCO 33678/2 REPAIR KIT, LINK
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for trailing arm
- Quantity Unit: Set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Outer diameter: 60 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 33678/3
MAPCO 33678/3 REPAIR KIT, LINK
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for trailing arm
- Quantity Unit: Set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Outer diameter: 60 mm
- Supplementary Article/Info 2: with lock screw set
- Required quantity: 1
To the price display, please log in
Art. No . : 51610HPS
MAPCO 51610HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 78,0 mm
- Thread Size: M10x1,5
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 52606
MAPCO 52606 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Lower
- Cone Size: 18,0 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 52608
MAPCO 52608 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Cone Size: 18,0 mm
- Paired article numbers: 52609
- Required quantity: 1
To the price display, please log in
Art. No . : 52609
MAPCO 52609 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Cone Size: 18,0 mm
- Paired article numbers: 52608
- Required quantity: 1
To the price display, please log in
Art. No . : 52611
MAPCO 52611 INNER TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Axle Joint Length: 307 mm
- Thread Size 1: M14x1,5
- Thread Size 2: M16x1,5
- Required quantity: 2
To the price display, please log in
Art. No . : 53261
MAPCO 53261 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18,0 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 2
To the price display, please log in
Art. No . : 53651
MAPCO 53651 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Fitting Position: Lower
- Length: 280 mm
- Supplementary Article/Info 2: with lock screw set
- Required quantity: 1
To the price display, please log in
Art. No . : 53688
MAPCO 53688 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18,0 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 1
To the price display, please log in
Art. No . : 54612
MAPCO 54612 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Length: 110 mm
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 54612/2
MAPCO 54612/2 REPAIR KIT, STABILISER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Length: 110 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 55530
MAPCO 55530 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Vehicle Equipment: for vehicles with leveling control
To the price display, please log in
Art. No . : 59646
MAPCO 59646 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Upper
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 59664HPS
MAPCO 59664HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Length: 298 mm
- Thread Size: M10x1,5
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 59668
MAPCO 59668 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower
- Fitting Position: Front
- Length: 280 mm
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Steering Gears (1)
Art. No . : 29610
MAPCO 29610 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- Operating Mode: Hydraulic
- Manufacturer Restriction: TRW
- Supplementary Article/Info 2: with sensor
- Wheel Diameter up to: 17 inches
- Left-/right-hand drive vehicles: for left-hand drive vehicles
To the price display, please log in
Strut Mounts & Kits (5)
Art. No . : 34533
MAPCO 34533 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle left and right
- Required quantity: 1
To the price display, please log in
Art. No . : 34611
MAPCO 34611 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Rear Axle left and right
- Required quantity: 1
To the price display, please log in
Art. No . : 36612
MAPCO 36612 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: without ball bearing
- Replace in pairs only
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 36613
MAPCO 36613 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Inner diameter: 8 mm
- Outer diameter: 54 mm
- Width: 63 mm
- Supplementary Article/Info 2: without ball bearing
- Required quantity: 2
- Replace in pairs only
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 36614
MAPCO 36614 ANTI-FRICTION BEARING, SUSPENSION STRUT SUPPORT MOUNTING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Inner diameter: 35 mm
- Outer diameter: 107 mm
- Width: 44 mm
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Suspension Kit (1)
Art. No . : 53261
MAPCO 53261 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18,0 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 2
To the price display, please log in
Tie Rod Axle Joint (1)
Art. No . : 52611
MAPCO 52611 INNER TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Axle Joint Length: 307 mm
- Thread Size 1: M14x1,5
- Thread Size 2: M16x1,5
- Required quantity: 2
To the price display, please log in
Track Control Arm (5)
Art. No . : 52608
MAPCO 52608 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Cone Size: 18,0 mm
- Paired article numbers: 52609
- Required quantity: 1
To the price display, please log in
Art. No . : 52609
MAPCO 52609 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Cone Size: 18,0 mm
- Paired article numbers: 52608
- Required quantity: 1
To the price display, please log in
Art. No . : 55530
MAPCO 55530 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Vehicle Equipment: for vehicles with leveling control
To the price display, please log in
Art. No . : 59646
MAPCO 59646 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Cast Steel
- Fitting Position: Upper
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Art. No . : 59668
MAPCO 59668 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Lower
- Fitting Position: Front
- Length: 280 mm
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
To the price display, please log in
Vee-Belts (2)
Art. No . : 250868E
MAPCO 250868E V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Number of ribs: 5
- Length: 868 mm
- Driven Units: Driven unit: aircon compressor
To the price display, please log in
Art. No . : 261059E
MAPCO 261059E V-RIBBED BELT
Manufacturer: MAPCO
Product Info:
- Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)
- Number of ribs: 6
- Length: 1059 mm
- Driven Units: Driven unit: alternator
To the price display, please log in
Water Pumps (1)
Art. No . : 21613
MAPCO 21613 WATER PUMP
Manufacturer: MAPCO
Product Info:
- Operating Mode: Mechanical
- Supplementary Article/Info 2: with fastening material
To the price display, please log in
Wheel Bearing Kits & Wheel Hubs (4)
Art. No . : 26644
MAPCO 26644 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Rim Hole Number: 5
- Flange Ø: 136 mm
To the price display, please log in
Art. No . : 26647
MAPCO 26647 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Rim Hole Number: 5
- Flange Ø: 131,5 mm
- Supplementary Article/Info 2: with integrated magnetic sensor ring
- Construction year from: 2007/03
Construction year to: 2010/08
To the price display, please log in
Art. No . : 46644
MAPCO 46644 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Quantity Unit: Set
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 46647
MAPCO 46647 WHEEL BEARING KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Supplementary Article/Info 2: Contains two wheel bearing sets
- Construction year from: 2007/03
Construction year to: 2010/08
To the price display, please log in
Windscreen Washer Pumps (1)
Art. No . : 90601
MAPCO 90601 WATER PUMP, WINDOW CLEANING
Manufacturer: MAPCO
Product Info:
- Pump Type: Dual Pump
- Voltage: 12,0 V
- Operating Mode: Electric
To the price display, please log in
Wiper Blades (2)
Art. No . : 104650HPS
MAPCO 104650HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Quantity Unit: Piece
- Wiper blade type: Hybrid Wiper Blade
- Length: 650 mm
- Fitting Position: Driver side
To the price display, please log in
Art. No . : 104928
MAPCO 104928 WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear
- Length: 280 mm
To the price display, please log in
Wishbone Sets (2)
Art. No . : 53651
MAPCO 53651 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Fitting Position: Lower
- Length: 280 mm
- Supplementary Article/Info 2: with lock screw set
- Required quantity: 1
To the price display, please log in
Art. No . : 53688
MAPCO 53688 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Cone Size: 18,0 mm
- Supplementary Article/Info 2: with rubber mounting
- Required quantity: 1
To the price display, please log in
-
Payments
-
Shipping Services
-
Quality
-
PrivacySafe paymentSSL-Encryption
-
- Online Shop
- Legal
- Auto Spare Parts
© Copyright 2007-2022 -
v.1.00 - All carparts fits with FORD C-MAX (DM2) 1.6