Start Page › Old Vehicle Part Search
Alle Ersatz-& Verschleißteile passend für VW GOLF IV (1J1) 2.0
ABS Rings (2)
Art. No . : 26752/7
MAPCO 26752/7 SENSOR RING, ABS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Number of Teeth: 43
- Width: 21,0 mm
- Inner diameter: 61,2 mm
- Outer diameter: 78,0 mm
To the price display, please log in
Art. No . : 76737
MAPCO 76737 SENSOR RING, ABS
Manufacturer: MAPCO
Product Info:
- Number of Teeth: 43
- Width: 21,5 mm
- Inner diameter: 80,0 mm
- Outer diameter: 133,0 mm
- Fitting Position: Front Axle left and right
To the price display, please log in
ABS Sensors (3)
Art. No . : 86804
MAPCO 86804 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Number of pins: 2,0
To the price display, please log in
Art. No . : 86806
MAPCO 86806 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Sensor Type: Inductive Sensor
- Number of pins: 2,0
To the price display, please log in
Art. No . : 86809
MAPCO 86809 SENSOR, WHEEL SPEED
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Length: 75 mm
To the price display, please log in
Accessories (1)
Art. No . : 76999
MAPCO 76999 TEST UNIT, SENSOR RING
Manufacturer: MAPCO
To the price display, please log in
Air Filter (2)
Art. No . : 60034
MAPCO 60034 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Length: 364 mm
- Width: 185 mm
- Height: 50 mm
To the price display, please log in
Art. No . : 60385
MAPCO 60385 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Shape: angular
- Length: 364 mm
- Width: 185 mm
- Height: 60 mm
- Climate Zones: for cold climates
To the price display, please log in
Air Mass Sensor (2)
Art. No . : 42804
MAPCO 42804 AIR MASS SENSOR
Manufacturer: MAPCO
Product Info:
- Voltage: 12 V
- Number of pins: 5
- Recommended additional repairs: Air Filter
- TecDoc Engine Number: 15470
TecDoc Engine Number: 16419
To the price display, please log in
Art. No . : 42805
MAPCO 42805 AIR MASS SENSOR
Manufacturer: MAPCO
Product Info:
- Voltage: 12 V
- Number of pins: 5
- Recommended additional repairs: Air Filter
- TecDoc Engine Number: 10607
TecDoc Engine Number: 11927
Construction year from: 1998/08
To the price display, please log in
Alternator (8)
Art. No . : 13219
MAPCO 13219 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Voltage: 12 V
- Vehicle Main Current: for vehicles with 12V main current
- Alternator Charge Current: 70 A
- Number of ribs: 6
- Belt Pulley Ø: 56 mm
- Clamp: B+ M8
- Pulleys: with v-ribbed belt pulley
To the price display, please log in
Art. No . : 13701
MAPCO 13701 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Voltage: 14,0 V
- Alternator Charge Current: 90,0 A
- Number of ribs: 6
- Belt Pulley Ø: 56,0 mm
- Pulleys: with v-ribbed belt pulley
- Vehicle Main Current: for vehicles with 12V main current
- New part without deposit
To the price display, please log in
Art. No . : 13701/2
MAPCO 13701/2 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Supplementary Article/Info 2: with belt
To the price display, please log in
Art. No . : 13718
MAPCO 13718 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Voltage: 14 V
- Vehicle Main Current: for vehicles with 12V main current
- Alternator Charge Current: 90 A
- Number of ribs: 6
- Pulleys: V-Ribbed Belt Pulley
- Belt Pulley Ø: 56 mm
- Clamp: M8 B+
To the price display, please log in
Art. No . : 13720
MAPCO 13720 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Voltage: 14,0 V
- Alternator Charge Current: 120,0 A
- Number of ribs: 6
- Belt Pulley Ø: 56 mm
- Clamp: M8 B+
- Pulleys: with freewheel belt pulley
- Vehicle Main Current: for vehicles with 12V main current
- New part without deposit
- Construction year from: 2001/05
Construction year to: 2002/04
To the price display, please log in
Art. No . : 13720/1
MAPCO 13720/1 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- New part without deposit
- Vehicle Main Current: for vehicles with 12V main current
- Supplementary Article/Info 2: with belt
- Voltage: 14 V
- Alternator Charge Current: 120 A
- Pulleys: with freewheel belt pulley
- Number of ribs: 6
- Belt Pulley Ø: 56 mm
- Clamp: M8 B+
- Construction year from: 2001/05
Construction year to: 2002/04
To the price display, please log in
Art. No . : 13720/2
MAPCO 13720/2 ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- New part without deposit
- Vehicle Main Current: for vehicles with 12V main current
- Supplementary Article/Info 2: with belt
- Voltage: 14 V
- Alternator Charge Current: 120 A
- Pulleys: with freewheel belt pulley
- Number of ribs: 6
- Belt Pulley Ø: 56 mm
- Clamp: M8 B+
- Construction year from: 2001/05
Construction year to: 2002/04
To the price display, please log in
Art. No . : 13726
MAPCO 13726 ALTERNATOR
Manufacturer: MAPCO
- TecDoc Engine Number: 10607
TecDoc Engine Number: 11927
TecDoc Engine Number: 15470
Construction year from: 1998/08
Manufacturer Restriction: Bosch
---------
TecDoc Engine Number: 10607
TecDoc Engine Number: 11927
TecDoc Engine Number: 15470
Construction year from: 1998/08
Manufacturer Restriction: VALEO
---------
TecDoc Engine Number: 16419
Construction year from: 2001/05
To the price display, please log in
Alternator Freewheel Clutch (1)
Art. No . : 14700
MAPCO 14700 FREEWHEEL CLUTCH, ALTERNATOR
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: Requires special tools for mounting
- Driven Units: Driven unit: alternator
Manufacturer Restriction: Bosch
Alternator Charge Current [A]: 120
for OE number: 028 903 028 E
for OE number: 038 903 024 F
---------
Driven Units: Driven unit: alternator
Manufacturer Restriction: Valeo
Alternator Charge Current [A]: 120
for OE number: 038 903 023 S
for OE number: 038 903 024 G
---------
Driven Units: Driven unit: alternator
Manufacturer Restriction: Hitachi
Alternator Charge Current [A]: 120
for OE number: 028 903 029 G
To the price display, please log in
Axle Beam (1)
Art. No . : 54768
MAPCO 54768 AXLE BEAM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with rubber mounting
- Stabiliser Diameter: 18 mm
To the price display, please log in
Ball Joint (4)
Art. No . : 49702
MAPCO 49702 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Supplementary Article/Supplementary Info: without add-on material
- Required quantity: 1
- Paired article numbers: 49703
To the price display, please log in
Art. No . : 49702/1
MAPCO 49702/1 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with fastening material
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Thread Size: M12x1,5
- Paired article numbers: 49703/1
- Required quantity: 1
To the price display, please log in
Art. No . : 49703
MAPCO 49703 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Supplementary Article/Supplementary Info: without add-on material
- Required quantity: 1
- Paired article numbers: 49702
To the price display, please log in
Art. No . : 49703/1
MAPCO 49703/1 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with fastening material
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Thread Size: M12x1,5
- Paired article numbers: 49702/1
- Required quantity: 1
To the price display, please log in
Bellow Steering (2)
Art. No . : 17844
MAPCO 17844 BELLOW, STEERING
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Inner diameter 1: 15,0 mm
- Inner diameter 2: 49,5 mm
- Length: 186 mm
To the price display, please log in
Art. No . : 29997/1
MAPCO 29997/1 BELLOW SET, STEERING
Manufacturer: MAPCO
Product Info:
- Inner diameter 1: 10,0 mm
- Inner diameter 2: 27,0 mm
- Height: 17,0 mm
To the price display, please log in
Brake & Clutch Cables (2)
Art. No . : 5747
MAPCO 5747 CABLE, PARKING BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear
- Length: 1688 mm
- Construction year from: 1998/08
Vehicle Identification Number to: 1J-Y-238580
Required quantity: 2
Brake Type: Disc Brake
To the price display, please log in
Art. No . : 5794
MAPCO 5794 CABLE, PARKING BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear
- Length: 1700,0 mm
- Required quantity: 2
- Vehicle Identification Number from: 1J-Y-238581
Construction year to: 2003/10
Brake Type: Disc Brake
To the price display, please log in
Brake Calipers/ Carrier (13)
Art. No . : 4863
MAPCO 4863 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Fitting Position: Rear Axle Left
- Brake Caliper Type: Fist-type Caliper
- Piston Diameter: 38 mm
- Paired article numbers: 4864
- New part without deposit
- Vehicle Identification Number from: 1J-Y-238581
Brake Disc Type: Solid
for combined PR number: 1KK+1KS+1KV
for combined PR number: 1KQ+1KW
To the price display, please log in
Art. No . : 4863/1
MAPCO 4863/1 CARRIER, BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Brake System: LUCAS/TRW
- Paired article numbers: 4864/1
- for PR number: 1KK
for PR number: 1KS
for PR number: 1KT
To the price display, please log in
Art. No . : 4863/2
MAPCO 4863/2 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Brake Caliper Type: Fist-type Caliper
- Bore Ø: 38 mm
- Supplementary Article/Supplementary Info: with holder
To the price display, please log in
Art. No . : 4863/3
MAPCO 4863/3 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- New part without deposit
- Brake Caliper Type: Fist-type Caliper
- Brake System: LUCAS
- Diameter: 38 mm
- Paired article numbers: 4864/3
- Length: 87 mm
- Height: 52,9 mm
- Thickness: 17 mm
- Supplementary Article/Supplementary Info: with accessories
To the price display, please log in
Art. No . : 4864
MAPCO 4864 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Fitting Position: Rear Axle Right
- Brake Caliper Type: Fist-type Caliper
- Piston Diameter: 38 mm
- Paired article numbers: 4863
- New part without deposit
- Vehicle Identification Number from: 1J-Y-238581
Brake Disc Type: Solid
for PR number: 1KK
for combined PR number: 1KQ+1KW
To the price display, please log in
Art. No . : 4864/1
MAPCO 4864/1 CARRIER, BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Brake System: LUCAS
- Paired article numbers: 4863/1
- for PR number: 1KK
for PR number: 1KS
for PR number: 1KV
To the price display, please log in
Art. No . : 4864/2
MAPCO 4864/2 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Bore Ø: 38 mm
- Brake Caliper Type: Fist-type Caliper
- Supplementary Article/Supplementary Info: with holder
- Vehicle Identification Number from: 1J-Y-238581
Construction year to: 2003/10
To the price display, please log in
Art. No . : 4864/3
MAPCO 4864/3 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- New part without deposit
- Brake System: LUCAS
- Brake Caliper Type: Fist-type Caliper
- Diameter: 38 mm
- Paired article numbers: 4863/3
- Length: 87 mm
- Height: 52,9 mm
- Thickness: 17 mm
- Construction year to: 2003/10
Vehicle Identification Number from: 1J-Y-238581
To the price display, please log in
Art. No . : 4876
MAPCO 4876 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Piston Diameter: 38 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: LUCAS
- New part without deposit
- Paired article numbers: 4877
- Construction year to: 1999/06
for combined PR number: 1KK+1KS
To the price display, please log in
Art. No . : 4877
MAPCO 4877 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Piston Diameter: 38 mm
- Brake Caliper Type: Fist-type Caliper
- Brake System: LUCAS
- New part without deposit
- Paired article numbers: 4876
- Construction year to: 1999/06
for combined PR number: 1KK+1KS
To the price display, please log in
Art. No . : 4886
MAPCO 4886 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Brake Caliper Type: Fist-type Caliper
- Brake System: ATE
- Fitting Position: Front Axle Left
- Piston Diameter: 54 mm
- Paired article numbers: 4887
- for combined PR number: 1LR+1LS+1ZM
for PR number: 1ZM
To the price display, please log in
Art. No . : 4886/2
MAPCO 4886/2 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Brake System: ATE
- Brake Caliper Type: Fist-type Caliper
- Fitting Position: Front Axle
- Diameter: 54,0 mm
- Multi-piece: Two-piece
- Required quantity: 1
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LR+1LS+1LQ
for PR number: 1ZM
To the price display, please log in
Art. No . : 4887
MAPCO 4887 BRAKE CALIPER
Manufacturer: MAPCO
Product Info:
- Brake Caliper Type: Fist-type Caliper
- Brake System: ATE
- Fitting Position: Front Axle Right
- Piston Diameter: 54 mm
- Paired article numbers: 4886
- Brake Disc Type: Vented
for PR number: 1ZM
To the price display, please log in
Brake Discs (9)
Art. No . : 15830C
MAPCO 15830C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Height: 36,7 mm
- Inner diameter: 133,5 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LQ+1ZF
To the price display, please log in
Art. No . : 15831
MAPCO 15831 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake Disc Thickness: 22,0 mm
- Outer diameter: 280,0 mm
- Brake Disc Type: Vented
- Bolt Hole Circle Ø: 100,0 mm
- Number of Holes: 5
- Minimum thickness: 19,0 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LR+1LS+1ZM
To the price display, please log in
Art. No . : 15831C
MAPCO 15831C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Surface: Coated
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 280 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Bolt Hole Circle Ø: 100 mm
- Number of Holes: 5
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LR+1LS+1ZM
To the price display, please log in
Art. No . : 15832
MAPCO 15832 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 288,0 mm
- Brake Disc Thickness: 25,0 mm
- Minimum thickness: 22,0 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100,0 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LE+1LN+1ZE
To the price display, please log in
Art. No . : 15832C
MAPCO 15832C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Outer diameter: 288,0 mm
- Brake Disc Thickness: 25,0 mm
- Minimum thickness: 22,0 mm
- Brake Disc Type: Vented
- Surface: Coated
- Number of Holes: 5
- Bolt Hole Circle Ø: 100,0 mm
- Height: 34,5 mm
- Centering Diameter: 65,0 mm
- Inner diameter: 136,0 mm
- Bore Ø: 15,6 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LE+1LN+1ZE
To the price display, please log in
Art. No . : 15837
MAPCO 15837 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Brake Disc Thickness: 9,0 mm
- Outer diameter: 230,0 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100,0 mm
- Minimum thickness: 7,0 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1KK+1KS+1KV
for combined PR number: 1KQ+1KW
To the price display, please log in
Art. No . : 15837C
MAPCO 15837C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Surface: Coated
- Fitting Position: Rear Axle
- Brake Disc Type: Solid
- Outer diameter: 230 mm
- Brake Disc Thickness: 9 mm
- Minimum thickness: 7 mm
- Bolt Hole Circle Ø: 100 mm
- Number of Holes: 5
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1KK+1KS+1KV
for combined PR number: 1KQ+1KW
To the price display, please log in
Art. No . : 15870
MAPCO 15870 BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake Disc Type: Vented
- Minimum thickness: 20,0 mm
- Brake Disc Thickness: 22,0 mm
- Outer diameter: 256,0 mm
- Bolt Hole Circle Ø: 100,0 mm
- Number of Holes: 5
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Art. No . : 15870C
MAPCO 15870C BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 20 mm
- Height: 36,6 mm
- Inner diameter: 135 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Brake Fluid (2)
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Brake Hose Set (1)
Art. No . : 3663/1
MAPCO 3663/1 BRAKE HOSE SET
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
To the price display, please log in
Brake Hoses (4)
Art. No . : 3662
MAPCO 3662 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Left
- Fitting Position: at brake caliper
- Length: 233,0 mm
- Supplementary Article/Info 2: Steel Braided
- Supplementary Article/Supplementary Info: with pipe
- Supplementary Article/Info 2: with hollow screw
- Thread Size: M12x1
- External Thread 2: M10x1 mm
- Paired article numbers: 3663
- Construction year from: 1998/08
Construction year to: 2003/10
To the price display, please log in
Art. No . : 3663
MAPCO 3663 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle Right
- Fitting Position: at brake caliper
- Length: 233,0 mm
- Supplementary Article/Info 2: Steel Braided
- Supplementary Article/Supplementary Info: with pipe
- Supplementary Article/Info 2: with hollow screw
- Thread Size: M12x1
- External Thread 2: M10x1 mm
- Paired article numbers: 3662
- Construction year from: 1998/08
Construction year to: 2003/10
To the price display, please log in
Art. No . : 3749
MAPCO 3749 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Length: 435,0 mm
- Thread Size: M10x1
- Internal Thread: M10x1 mm
- Spanner Size: 11/15
- Supplementary Article/Info 2: with hollow screw
- Supplementary Article/Supplementary Info: with seal
- Fitting Position: Front Axle
- Construction year from: 1998/08
Construction year to: 2003/10
Required quantity: 2
To the price display, please log in
Art. No . : 3750
MAPCO 3750 BRAKEHOSE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Length: 165,0 mm
- Internal Thread 1: M10x1 mm
- Internal Thread 2: M10x1 mm
- Spanner Size: 15/15
- Construction year from: 1998/08
Construction year to: 2003/10
To the price display, please log in
Brake Kits (11)
Art. No . : 47321HPS
MAPCO 47321HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Brake Disc Type: Vented
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 20 mm
- Height: 36,6 mm
- Inner diameter: 135 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Width: 87,6 mm
- Brake Disc Thickness: 17,2 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
- Quantity Unit: Set
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Art. No . : 47831/112C
MAPCO 47831/112C BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Required quantity: 1
- Brake Disc Thickness: 22,0 mm
- Outer diameter: 280,0 mm
- Brake Disc Type: Vented
- Minimum thickness: 19,0 mm
- Multi-piece: Multi-piece
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LR+1LS+1ZM
To the price display, please log in
Art. No . : 47832/112C
MAPCO 47832/112C BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Number of Holes: 5
- Bolt Hole Circle Ø: 112 mm
- Required quantity: 1
- Brake Disc Type: Vented
- Outer diameter: 288,0 mm
- Brake Disc Thickness: 25,0 mm
- Minimum thickness: 22,0 mm
- Multi-piece: Multi-piece
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LE+1LN+1ZE
To the price display, please log in
Art. No . : 47855/9HPS
MAPCO 47855/9HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Inner diameter: 133,5 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 145 mm
- Quality: HPS standard
To the price display, please log in
Art. No . : 47855HPS
MAPCO 47855HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Height: 36,7 mm
- Inner diameter: 133,5 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Brake System: Volkswagen
- Width: 146 mm
- Brake Disc Thickness: 19,6 mm
- Wear Warning Contact: not prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LQ+1ZF
To the price display, please log in
Art. No . : 47857
MAPCO 47857 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Fitting Position: Front Axle
- Brake System: ATE
- Brake Disc Type: Vented
- Outer diameter: 280,0 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Wear Warning Contact: incl. wear warning contact
- Required quantity: 1
- Brake Disc Thickness: 22 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LR+1LS+1ZM
To the price display, please log in
Art. No . : 47857/1
MAPCO 47857/1 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Outer diameter: 280 mm
- Wear Warning Contact: incl. wear warning contact
- Brake Disc Type: Vented
- Brake System: ATE
- Fitting Position: Rear Axle
- Outer diameter: 230 mm
- Brake Disc Type: Solid
- Brake System: LUCAS
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Construction year from: 1998/08
for PR number: 1LR
Construction year to: 2003/10
To the price display, please log in
Art. No . : 47857/9HPS
MAPCO 47857/9HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- Fitting Position: Front Axle
- Brake Disc Type: Vented
- Outer diameter: 280 mm
- Brake Disc Thickness: 22 mm
- Bolt Hole Circle Ø: 100 mm
- Number of Holes: 5
- Brake System: ATE
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 145 mm
- Quality: HPS standard
To the price display, please log in
Art. No . : 47857HPS
MAPCO 47857HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 280 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Height: 36,7 mm
- Inner diameter: 133,5 mm
- Bore Ø: 15,6 mm
- Machining: High-carbon
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Supplementary Article/Info 2: with bolts/screws
- Brake System: Volkswagen
- Width: 146 mm
- Brake Disc Thickness: 19,6 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 145 mm
- Quantity Unit: Set
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 47858
MAPCO 47858 BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake System: LUCAS
- Wear Warning Contact: excl. wear warning contact
- Brake Disc Type: Solid
- Number of Holes: 5
- Outer diameter: 230 mm
- Brake Disc Thickness: 9,0 mm
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1KS+1KV
To the price display, please log in
Art. No . : 47858HPS
MAPCO 47858HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Outer diameter: 230 mm
- Brake Disc Thickness: 9 mm
- Minimum thickness: 7 mm
- Inner diameter: 125,8 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Brake System: Lucas / TRW
- Width: 87,6 mm
- Height: 52,9 mm
- Brake Disc Thickness: 17.2 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 2
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1KK+1KS+1KV
To the price display, please log in
Brake Pads (7)
Art. No . : 6302
MAPCO 6302 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake System: Lucas / TRW
- Thickness: 15,2 mm
- Width: 87,0 mm
- Height: 53,0 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 2
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Art. No . : 6302/1
MAPCO 6302/1 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Width: 87,6 mm
- Height: 52,9 mm
- Thickness: 15,2 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
- Brake System: Lucas / TRW
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Art. No . : 6469/1
MAPCO 6469/1 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Brake System: ATE
- Fitting Position: Front Axle
- Thickness: 19,6 mm
- Width: 146,0 mm
- Height: 54,7 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 145 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LS+1LQ+1ZF
To the price display, please log in
Art. No . : 6469/1HPS
MAPCO 6469/1HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Brake System: ATE
- Fitting Position: Front Axle
- Thickness: 20 mm
- Width: 146 mm
- Height: 55 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 145 mm
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LS+1LQ+1ZF
To the price display, please log in
Art. No . : 6492
MAPCO 6492 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Fitting Position: Rear Axle
- Thickness: 16.4 mm
- Height: 52,9 mm
- Width: 87 mm
- Wear Warning Contact: not prepared for wear indicator
To the price display, please log in
Art. No . : 6492HPS
MAPCO 6492HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Brake System: Lucas / TRW
- Fitting Position: Rear Axle
- Thickness: 17,2 mm
- Width: 87,6 mm
- Height: 52,9 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 2
To the price display, please log in
Art. No . : 6579
MAPCO 6579 BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Thickness: 17,0 mm
- Width: 87,6 mm
- Height: 52,9 mm
- Wear Warning Contact: excl. wear warning contact
- Construction year to: 2003/12
Brake System: Girling-Lucas
To the price display, please log in
Brake Shoe Set parking brake (1)
Art. No . : 9400
MAPCO 9400 REPAIR KIT, PARKING BRAKE HANDLE (BRAKE CALIPER)
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Required quantity: 1
- Version: FEDERN, BREMSSATTEL
- Number of Parts: 2 parts
To the price display, please log in
Bushings (15)
Art. No . : 33819
MAPCO 33819 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Fitting Position: Lower
- Fitting Position: Front
- Height: 54 mm
- Outer diameter: 33 mm
- Inner diameter: 12 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 33824
MAPCO 33824 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Front Axle left and right
- Inner diameter: 21,0 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 33824/2
MAPCO 33824/2 REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Inner diameter: 21 mm
- Supplementary Article/Info 2: with rubber mounting
- Supplementary Article/Info 2: with clamps
- Required quantity: 1
To the price display, please log in
Art. No . : 33903
MAPCO 33903 MOUNTING, CONTROL/TRAILING ARM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Control/Trailing Arm Type: for control arm
- Fitting Position: Lower
- Fitting Position: Rear
- Height: 41 mm
- Outer diameter: 60 mm
- Inner diameter: 13 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 33912
MAPCO 33912 MOUNTING, AXLE BEAM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Rear Axle left and right
- Height: 90 mm
- Outer diameter: 72 mm
- Inner diameter: 12 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 33912/2
MAPCO 33912/2 REPAIR SET, AXLE BEAM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Rear Axle left and right
- Length: 90 mm
- Outer diameter: 72 mm
- Inner diameter: 11,0 mm
- Supplementary Article/Info 2: with fastening material
- Required quantity: 1
To the price display, please log in
Art. No . : 36787
MAPCO 36787 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Front Axle left and right
- Inner diameter: 19,0 mm
- Required quantity: 2
- Vehicle Identification Number to: 1J-Y-900 000
Stabiliser Diameter [mm]: 21
To the price display, please log in
Art. No . : 36787/2
MAPCO 36787/2 REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Inner diameter: 19 mm
- Supplementary Article/Info 2: with rubber mounting
- Supplementary Article/Info 2: with clamps
- Required quantity: 1
To the price display, please log in
Art. No . : 36852
MAPCO 36852 MOUNTING, AXLE BRACKET
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Front Axle left and right
- Height: 31 mm
- Outer diameter: 50 mm
- Inner diameter: 18 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 37826
MAPCO 37826 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Inner diameter: 19 mm
- Required quantity: 2
- for PR number: 0AL
To the price display, please log in
Art. No . : 37894
MAPCO 37894 MOUNTING, AXLE BEAM
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Rear Axle left and right
- Inner diameter: 12 mm
- Outer diameter: 69 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 38835
MAPCO 38835 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Rear Axle left and right
- Inner diameter: 18 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 38836
MAPCO 38836 STABILISER MOUNTING
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Fitting Position: Rear Axle left and right
- Inner diameter: 22 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 38836/2
MAPCO 38836/2 BEARING SET, STABILISER
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber Bush
- Quantity Unit: Set
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Inner diameter: 22 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 57748
MAPCO 57748 REPAIR SET, AXLE BEAM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Fitting Position: Rear Axle
- Braking / Drive Dynamics: for vehicles with ABS
- Stabiliser Diameter: 18 mm
- Supplementary Article/Info 2: with wheel hub
- Supplementary Article/Info 2: with rubber mounting
To the price display, please log in
CV Boot Kit (15)
Art. No . : 17983
MAPCO 17983 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 94 mm
To the price display, please log in
Art. No . : 17984
MAPCO 17984 MOUNTING CONE, BELLOW
Manufacturer: MAPCO
Product Info:
- Diameter to: 110 mm
To the price display, please log in
Art. No . : 17988
MAPCO 17988 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Diameter from: 25,0 mm
- Diameter to: 125,0 mm
- Scope: 100,0 mm
- Quantity Unit: Piece
- Required quantity: 1
To the price display, please log in
Art. No . : 17988/10
MAPCO 17988/10 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Kit
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
- Manufacturer Restriction: 10 Stück im Beutel
To the price display, please log in
Art. No . : 17988/50
MAPCO 17988/50 HOSE CLAMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Diameter from: 25 mm
- Diameter to: 125 mm
- Scope: 100 mm
To the price display, please log in
Art. No . : 17988/9
MAPCO 17988/9 CLAMPING PLIERS, BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 17991
MAPCO 17991 BELLOW, DRIVESHAFT
Manufacturer: MAPCO
Product Info:
- Height: 145 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Art. No . : 18719
MAPCO 18719 BELLOW SET, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Wheel Side
- Length: 126 mm
- Inner diameter 1: 26,5 mm
- Inner diameter 2: 89 mm
- Transmission Type: Manual Transmission
Transmission Type: Fully Automatic
To the price display, please log in
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: Für PKW
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Central Slave Cylinder & Releaser (3)
Art. No . : 12741/6
MAPCO 12741/6 RELEASE SET, CLUTCH OPERATION
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Length: 342,0 mm
- Inner diameter 1: 8 mm
- Outer diameter 1: 14 mm
- Height: 4,0 mm
- Inner diameter: 21,9 mm
- Outer diameter: 40 mm
To the price display, please log in
To the price display, please log in
Chemical Products (4)
Art. No . : 17987
MAPCO 17987 UNIVERSAL LUBRICANT
Manufacturer: MAPCO
Product Info:
- Packing Type: Spraycan
- Chemical Properties: Silicon-free
- Chemical Properties: Thin
- Quantity Unit: Tin
- Manufacturer Restriction: Montage-Spray
- Supplementary Article/Info 2: with PTFE (polytetrafluoroethylene)
To the price display, please log in
Art. No . : 9040/2
MAPCO 9040/2 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Bottle
- Content: 1 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 9040/3
MAPCO 9040/3 BRAKE FLUID
Manufacturer: MAPCO
Product Info:
- DOT specification: DOT 4
- Packing Type: Canister
- Content: 5 litre
- Dry Boiling Point: 260 °C
- Wet Boiling Point: 160 °C
To the price display, please log in
Art. No . : 99134
MAPCO 99134 REFRIGERANT, AIR CONDITIONING
Manufacturer: MAPCO
Product Info:
- Refrigerant: R 134a
- Contents: 12 kg
- New Part
To the price display, please log in
Clutch & Clutch Components (4)
Art. No . : 10755
MAPCO 10755 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Used part return not required
- Diameter: 215,0 mm
- Number of Teeth: 28
- Hub Profile: 20,3x22,3
- Multi-piece: Three-piece
- Supplementary Article/Info 2: with clutch release bearing
To the price display, please log in
To the price display, please log in
Art. No . : 10755/9
MAPCO 10755/9 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- Generally overhauled
- Used part return required
- Diameter: 215 mm
- Number of Teeth: 28
- Multi-piece: Three-piece
- Supplementary Article/Info 2: with clutch release bearing
- Construction year from: 1999/03
TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
TecDoc Engine Number: 15470
TecDoc Engine Number: 16419
To the price display, please log in
Art. No . : 12741/6
MAPCO 12741/6 RELEASE SET, CLUTCH OPERATION
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Length: 342,0 mm
- Inner diameter 1: 8 mm
- Outer diameter 1: 14 mm
- Height: 4,0 mm
- Inner diameter: 21,9 mm
- Outer diameter: 40 mm
To the price display, please log in
Clutch Master Slave Cylinder (4)
Art. No . : 1792
MAPCO 1792 MASTER CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Material: Plastic
- Diameter: 15,87 mm
- Left-/right-hand drive vehicles: for right-hand drive vehicles
To the price display, please log in
Art. No . : 1793
MAPCO 1793 MASTER CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Diameter: 15,87 mm
- TecDoc Engine Number: 11927
Construction year to: 2003/10
Left-/right-hand drive vehicles: for left-hand drive vehicles
TecDoc Engine Number: 16419
Left-/right-hand drive vehicles: for left-hand drive vehicles
To the price display, please log in
Art. No . : 2890
MAPCO 2890 SLAVE CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Diameter: 19,05 mm
To the price display, please log in
Art. No . : 2892
MAPCO 2892 SLAVE CYLINDER, CLUTCH
Manufacturer: MAPCO
Product Info:
- Material: Plastic
- Diameter: 19,05 mm
- Vehicle Equipment: for vehicles with shift cable
for PR number: 0EM
To the price display, please log in
Clutch Repair Kits (4)
Art. No . : 10755
MAPCO 10755 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Used part return not required
- Diameter: 215,0 mm
- Number of Teeth: 28
- Hub Profile: 20,3x22,3
- Multi-piece: Three-piece
- Supplementary Article/Info 2: with clutch release bearing
To the price display, please log in
To the price display, please log in
Art. No . : 10755/9
MAPCO 10755/9 CLUTCH KIT
Manufacturer: MAPCO
Product Info:
- Generally overhauled
- Used part return required
- Diameter: 215 mm
- Number of Teeth: 28
- Multi-piece: Three-piece
- Supplementary Article/Info 2: with clutch release bearing
- Construction year from: 1999/03
TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
TecDoc Engine Number: 15470
TecDoc Engine Number: 16419
To the price display, please log in
Art. No . : 12741/6
MAPCO 12741/6 RELEASE SET, CLUTCH OPERATION
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Length: 342,0 mm
- Inner diameter 1: 8 mm
- Outer diameter 1: 14 mm
- Height: 4,0 mm
- Inner diameter: 21,9 mm
- Outer diameter: 40 mm
To the price display, please log in
Coil Springs (6)
Art. No . : 70875
MAPCO 70875 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Spring Design: Coil Spring
- Fitting Position: Rear Axle
- Wire Diameter: 10.5 mm
- Outer diameter: 108.5 mm
- Length: 343 mm
- Number of coils: 7,5
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 70875/2
MAPCO 70875/2 SUSPENSION KIT, COIL SPRINGS
Manufacturer: MAPCO
Product Info:
- Spring Design: Coil Spring
- Quantity Unit: Set
- Fitting Position: Rear Axle
- Wire Diameter: 10.5 mm
- Outer diameter: 108.5 mm
- Length: 343 mm
- Number of coils: 7,5
- Required quantity: 1
To the price display, please log in
Art. No . : 70877
MAPCO 70877 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Spring Design: Coil Spring
- Fitting Position: Front Axle
- Wire Diameter: 12,2 mm
- Outer diameter: 141,0 mm
- Length: 375,0 mm
- Number of coils: 6,9
- Replace in pairs only
To the price display, please log in
Art. No . : 70877/2
MAPCO 70877/2 SUSPENSION KIT, COIL SPRINGS
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Spring Design: Coil Spring
- Fitting Position: Front Axle
- Wire Diameter: 12,2 mm
- Outer diameter: 141 mm
- Length: 375 mm
- Number of coils: 6,9
- Required quantity: 1
To the price display, please log in
Art. No . : 72800
MAPCO 72800 COIL SPRING
Manufacturer: MAPCO
Product Info:
- Spring Design: Coil Spring
- Fitting Position: Front Axle
- Outer diameter: 140 mm
- Length: 365,0 mm
- Wire Diameter: 12,3 mm
- Number of coils: 6,9
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 72800/2
MAPCO 72800/2 SUSPENSION KIT, COIL SPRINGS
Manufacturer: MAPCO
Product Info:
- Spring Design: Coil Spring
- Quantity Unit: Set
- Fitting Position: Front Axle
- Length: 365 mm
- Outer diameter: 66,5 mm
- Wire Diameter: 12,3 mm
- Number of coils: 6,9
- Required quantity: 1
To the price display, please log in
Crankshaft Sensors (3)
Art. No . : 82803
MAPCO 82803 SENSOR, CRANKSHAFT PULSE
Manufacturer: MAPCO
Product Info:
- Length: 570 mm
- Number of pins: 3
- Resistor: 900 Ohm
- TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
To the price display, please log in
Art. No . : 82804
MAPCO 82804 SENSOR, CRANKSHAFT PULSE
Manufacturer: MAPCO
Product Info:
- Length: 215 mm
- Number of Poles: 3
- Resistor: 900 Ohm
To the price display, please log in
To the price display, please log in
Drive Shafts Stub Axle Differential (4)
Art. No . : 16755
MAPCO 16755 DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- New Part
- Used part return not required
- Fitting Position: Front Axle Left
- Length: 553 mm
- Outer gearing wheel side: 36
- Seal Diameter: 53 mm
- Wheel-side joint diameter: 90 mm
- Transmission-side joint diameter: 100 mm
- Thread Size: M20x1.5
- Bore Ø: 8,2 mm
- Number of bores: 6
- Bolt Hole Circle Ø: 86 mm
- TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
TecDoc Engine Number: 15470
TecDoc Engine Number: 16419
Transmission Type: Manual Transmission
To the price display, please log in
Art. No . : 16755HPS
MAPCO 16755HPS DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- New Part
- Fitting Position: Front Axle Left
- Outer gearing wheel side: 36
- Seal Diameter: 53 mm
- Wheel-side joint diameter: 90 mm
- Transmission-side joint diameter: 100 mm
- Thread Size: M20x1.5
- Bore Ø: 8,2 mm
- Number of bores: 6
- Bolt Hole Circle Ø: 86 mm
- TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
TecDoc Engine Number: 15470
TecDoc Engine Number: 16419
Transmission Type: Manual Transmission
To the price display, please log in
Art. No . : 16756
MAPCO 16756 DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- New Part
- Used part return not required
- Fitting Position: Front Axle Right
- Length: 820 mm
- Outer gearing wheel side: 36
- Seal Diameter: 52 mm
- Wheel-side joint diameter: 90 mm
- Transmission-side joint diameter: 100 mm
- Thread Size: M20x1.5
- Bore Ø: 8,2 mm
- Number of bores: 6
- Bolt Hole Circle Ø: 86 mm
- Transmission Type: 5-Speed Manual Transmission
To the price display, please log in
Art. No . : 16756HPS
MAPCO 16756HPS DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Length: 815 mm
- Thread Size: M20x1.5
- Outer gearing wheel side: 36
- Seal Diameter: 53 mm
- Wheel-side joint diameter: 90 mm
- Transmission-side joint diameter: 100 mm
- Bore Ø: 8.2 mm
- Number of bores: 6
- Bolt Hole Circle Ø: 86 mm
- for shaft diameter: 27 mm
- Suspension: for vehicles with lowered suspension
- Quality: HPS standard
To the price display, please log in
Engine & Gearbox Mountings (4)
Art. No . : 36841
MAPCO 36841 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Fitting Position: Right
- Required quantity: 1
- TecDoc Engine Number: 11927
TecDoc Engine Number: 16419
TecDoc Engine Number: 10607
TecDoc Engine Number: 15470
To the price display, please log in
Art. No . : 36870
MAPCO 36870 TRANSMISSION MOUNT
Manufacturer: MAPCO
Product Info:
- Mounting Type: Rubber-Metal Mount
- Material: Steel Elastomer
- Fitting Position: Left
To the price display, please log in
Art. No . : 36871
MAPCO 36871 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Left
- Mounting Type: Rubber-Metal Mount
- Transmission Type: Manual Transmission
To the price display, please log in
Art. No . : 36888
MAPCO 36888 ENGINE MOUNT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear
- Mounting Type: Rubber-Metal Mount
- Required quantity: 1
- Transmission Type: Manual Transmission
To the price display, please log in
Engine Timing Components (4)
Art. No . : 23851
MAPCO 23851 TENSIONER PULLEY, TIMING BELT
Manufacturer: MAPCO
Product Info:
- Outer diameter: 72,0 mm
- Width: 24,0 mm
- Supplementary Article/Supplementary Info: without accessories
To the price display, please log in
Art. No . : 23895
MAPCO 23895 TENSIONER PULLEY, TIMING BELT
Manufacturer: MAPCO
Product Info:
- Outer diameter: 72,0 mm
- Width: 29,0 mm
To the price display, please log in
Art. No . : 43832
MAPCO 43832 TIMING BELT
Manufacturer: MAPCO
Product Info:
- Number of Teeth: 138
- Width: 23,0 mm
- Driven Units: Driven unit: camshaft
TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
To the price display, please log in
Art. No . : 43870
MAPCO 43870 TENSIONER PULLEY, TIMING BELT
Manufacturer: MAPCO
Product Info:
- Outer diameter: 72 mm
- Width: 24 mm
- Supplementary Article/Supplementary Info: with add-on material
To the price display, please log in
Exhaust Silencers & Mountings (40)
Art. No . : 30200
MAPCO 30200 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Left and right
- Material: Stainless Steel
- Pipe Connector: Flexible
- Inner diameter: 42 mm
- Outer diameter: 67 mm
- Length: 94 mm
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 274 mm
To the price display, please log in
Art. No . : 30200/5
MAPCO 30200/5 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/7
MAPCO 30200/7 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30200/9
MAPCO 30200/9 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 30201
MAPCO 30201 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 390 mm
- Outer diameter: 67 mm
- Inner diameter: 42 mm
- Length: 262 mm
To the price display, please log in
Art. No . : 30202
MAPCO 30202 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Material: Stainless Steel
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Overall Length: 274 mm
- Length: 94 mm
To the price display, please log in
Art. No . : 30203
MAPCO 30203 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Inner diameter: 45,5 mm
- Supplementary Article/Info 2: with connecting pipe
- Overall Length: 290 mm
- Length: 150 mm
To the price display, please log in
Art. No . : 30204
MAPCO 30204 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Length: 190 mm
- Overall Length: 360 mm
To the price display, please log in
Art. No . : 30205
MAPCO 30205 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 45 mm
- Outer diameter: 67 mm
- Length: 240 mm
- Overall Length: 410 mm
- Material: Stainless Steel
To the price display, please log in
Art. No . : 30206
MAPCO 30206 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with connecting pipe
- Pipe Connector: Flexible
- One-sided / Double-sided: Left and right
- Material: Stainless Steel
- Inner diameter: 50 mm
- Outer diameter: 77 mm
- Overall Length: 390 mm
- Length: 250 mm
To the price display, please log in
Art. No . : 30207
MAPCO 30207 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 48,0 mm
- Length 1: 100 mm
- Length 2: 270 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30208
MAPCO 30208 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Inner diameter: 50,5 mm
- Overall Length: 280 mm
- Length: 100,0 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30209
MAPCO 30209 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length 1: 190 mm
- Length 2: 360 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30210
MAPCO 30210 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Material: Stainless Steel
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Inner diameter: 52 mm
- Outer diameter: 77 mm
- Length: 150 mm
- Overall Length: 290 mm
- One-sided / Double-sided: Left and right
To the price display, please log in
Art. No . : 30211
MAPCO 30211 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length 1: 105 mm
- Length 2: 285 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30212
MAPCO 30212 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55,0 mm
- Length 1: 195 mm
- Length 2: 365 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30213
MAPCO 30213 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 52,0 mm
- Length 1: 105 mm
- Length 2: 275 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30214
MAPCO 30214 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60,0 mm
- Length 1: 120 mm
- Length 2: 300 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30215
MAPCO 30215 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50,0 mm
- Length 1: 100 mm
- Length 2: 185 mm
- Supplementary Article/Info 2: with connecting pipe
To the price display, please log in
Art. No . : 30216
MAPCO 30216 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30217
MAPCO 30217 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30218
MAPCO 30218 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30219
MAPCO 30219 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 45 mm
- Length: 230 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30220
MAPCO 30220 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30221
MAPCO 30221 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30222
MAPCO 30222 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30223
MAPCO 30223 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 50 mm
- Length: 250 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30224
MAPCO 30224 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 150 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30225
MAPCO 30225 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 200 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30226
MAPCO 30226 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 55 mm
- Length: 280 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30227
MAPCO 30227 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 100 mm
- Specification: interlock
To the price display, please log in
Art. No . : 30228
MAPCO 30228 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Specification: interlock
- Diameter: 60 mm
- Length: 150 mm
To the price display, please log in
Art. No . : 30230
MAPCO 30230 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Flexible
- Supplementary Article/Info 2: with connecting pipe
- Outer diameter: 54,0 mm
- Outer diameter 1: 45 mm
- Outer diameter 2: 48 mm
- Overall Length: 400 mm
- Length: 105 mm
To the price display, please log in
Art. No . : 30232
MAPCO 30232 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Length: 100 mm
- Pipe Ø: 55,0 mm
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30232/3
MAPCO 30232/3 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Multi-piece: Three-piece
To the price display, please log in
Art. No . : 30233
MAPCO 30233 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 60 mm
- Length: 200 mm
- Supplementary Article/Info 2: without connecting pipe
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30234
MAPCO 30234 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Diameter: 70 mm
- Length: 100 mm
- Material: Stainless Steel
- Specification: Soft
To the price display, please log in
Art. No . : 30242/3
MAPCO 30242/3 FLEX HOSE, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Multi-piece: Three-piece
To the price display, please log in
Art. No . : 30252
MAPCO 30252 PIPE CONNECTOR, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Double Clamp
- Diameter: 50 mm
- Length: 125 mm
- Material: Stainless Steel
- Fitting Position: Rear
To the price display, please log in
Art. No . : 30253
MAPCO 30253 PIPE CONNECTOR, EXHAUST SYSTEM
Manufacturer: MAPCO
Product Info:
- Pipe Connector: Double Clamp
- Diameter: 55 mm
- Length: 125 mm
- Material: Stainless Steel
- Fitting Position: Centre
To the price display, please log in
Filter Set (2)
Art. No . : 68800
MAPCO 68800 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Supplementary Article/Info 2: for petrol
- Multi-piece: Four-piece
To the price display, please log in
Art. No . : 68806
MAPCO 68806 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Three-piece
To the price display, please log in
Filters & Filter Kits (15)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 126 mm
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 60034
MAPCO 60034 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Length: 364 mm
- Width: 185 mm
- Height: 50 mm
To the price display, please log in
Art. No . : 60385
MAPCO 60385 AIR FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Filter Insert
- Shape: angular
- Length: 364 mm
- Width: 185 mm
- Height: 60 mm
- Climate Zones: for cold climates
To the price display, please log in
Art. No . : 61096
MAPCO 61096 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Seal Diameter: 72 mm
- Outer diameter: 76 mm
- Height: 120,0 mm
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 2,5 bar
To the price display, please log in
Art. No . : 61096/10
MAPCO 61096/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Required quantity: 1
- Filter type: Spin-on Filter
- Seal Diameter: 72 mm
- Outer diameter: 76 mm
- Height: 120,0 mm
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 2,5 bar
To the price display, please log in
Art. No . : 61096/5
MAPCO 61096/5 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Multi-piece: Multi-piece
- Quantity Unit: Set
- Filter type: Spin-on Filter
- Seal Diameter: 72 mm
- Outer diameter: 76 mm
- Height: 120,0 mm
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 2,5 bar
- Supplementary Article/Supplementary Info: with oil drain plug
To the price display, please log in
Art. No . : 62230
MAPCO 62230 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: In-Line Filter
- Fuel Type: Petrol
- Outer diameter: 74 mm
- Inlet Ø: 8 mm
- Outlet Ø: 8 mm
- Height: 174 mm
To the price display, please log in
Art. No . : 65202
MAPCO 65202 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Material: Paper
- Filter type: Pollen Filter
- Length: 280,0 mm
- Width: 206 mm
- Height: 25 mm
To the price display, please log in
Art. No . : 65220
MAPCO 65220 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Pollen Filter
- Material: Paper
- Length: 282 mm
- Width: 206 mm
- Height: 30 mm
To the price display, please log in
Art. No . : 67208
MAPCO 67208 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Charcoal Filter
- Length: 282,0 mm
- Width: 206,0 mm
- Height: 30 mm
To the price display, please log in
Art. No . : 68800
MAPCO 68800 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Supplementary Article/Info 2: for petrol
- Multi-piece: Four-piece
To the price display, please log in
Art. No . : 68806
MAPCO 68806 FILTER SET
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Three-piece
To the price display, please log in
Fuel Filter (1)
Art. No . : 62230
MAPCO 62230 FUEL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: In-Line Filter
- Fuel Type: Petrol
- Outer diameter: 74 mm
- Inlet Ø: 8 mm
- Outlet Ø: 8 mm
- Height: 174 mm
To the price display, please log in
Fuel Pumps (3)
Art. No . : 22881
MAPCO 22881 FUEL PUMP
Manufacturer: MAPCO
Product Info:
- Operating Mode: Electric
- Fuel Type: Petrol
- Supplementary Article/Supplementary Info: without tank sender unit
- Supplementary Article/Supplementary Info: with seal
- Pressure: 3 bar
- Voltage: 12 V
To the price display, please log in
To the price display, please log in
Art. No . : 22893
MAPCO 22893 FUEL PUMP
Manufacturer: MAPCO
Product Info:
- Operating Mode: Electric
- Pressure: 3,0 bar
To the price display, please log in
Gas Spring Bonnet (2)
Art. No . : 20959
MAPCO 20959 GAS SPRING, BONNET
Manufacturer: MAPCO
Product Info:
- Length: 500 mm
- Stroke: 205 mm
- Eject Force: 350 N
- Housing Diameter: 18 mm
- Piston Rod Diameter: 8,0 mm
- Replace in pairs only
- Fitting Position: Left
Required quantity: 1
To the price display, please log in
Art. No . : 91816
MAPCO 91816 GAS SPRING, BONNET
Manufacturer: MAPCO
Product Info:
- Eject Force: 350 N
- Length: 500 mm
- Stroke: 200 mm
- Piston Rod Diameter: 8 mm
- Housing Diameter: 18,5 mm
- Replace in pairs only
To the price display, please log in
Gas Springs Cargo Area (2)
Art. No . : 20961
MAPCO 20961 GAS SPRING, BOOT-/CARGO AREA
Manufacturer: MAPCO
Product Info:
- Length: 500,0 mm
- Piston Rod Diameter: 8,0 mm
- Housing Diameter: 18,0 mm
- Stroke: 205,0 mm
- Eject Force: 500 N
- Replace in pairs only
To the price display, please log in
Art. No . : 20961/2
MAPCO 20961/2 GAS SPRING, BOOT-/CARGO AREA
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Required quantity: 1
- Length: 500,0 mm
- Diameter 1: 8,0 mm
- Diameter 2: 18,0 mm
- Stroke: 205,0 mm
- Eject Force: 500 N
- Replace in pairs only
To the price display, please log in
HPS Brake Pads (1)
Art. No . : 6492HPS
MAPCO 6492HPS BRAKE PAD SET, DISC BRAKE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Brake System: Lucas / TRW
- Fitting Position: Rear Axle
- Thickness: 17,2 mm
- Width: 87,6 mm
- Height: 52,9 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 2
To the price display, please log in
HPS Carbon Brake Kits (4)
Art. No . : 47321HPS
MAPCO 47321HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Brake Disc Type: Vented
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 20 mm
- Height: 36,6 mm
- Inner diameter: 135 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Width: 87,6 mm
- Brake Disc Thickness: 17,2 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
- Quantity Unit: Set
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Art. No . : 47321HPS
MAPCO 47321HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Brake Disc Type: Vented
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 20 mm
- Height: 36,6 mm
- Inner diameter: 135 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Width: 87,6 mm
- Brake Disc Thickness: 17,2 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 4
- Quantity Unit: Set
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Art. No . : 47855HPS
MAPCO 47855HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Height: 36,7 mm
- Inner diameter: 133,5 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Brake System: Volkswagen
- Width: 146 mm
- Brake Disc Thickness: 19,6 mm
- Wear Warning Contact: not prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LQ+1ZF
To the price display, please log in
Art. No . : 47855HPS
MAPCO 47855HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 256 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Height: 36,7 mm
- Inner diameter: 133,5 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Machining: High-carbon
- Brake System: Volkswagen
- Width: 146 mm
- Brake Disc Thickness: 19,6 mm
- Wear Warning Contact: not prepared for wear indicator
- Wear Warning Contact: excl. wear warning contact
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1LQ+1ZF
To the price display, please log in
Art. No . : 47857HPS
MAPCO 47857HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 280 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Height: 36,7 mm
- Inner diameter: 133,5 mm
- Bore Ø: 15,6 mm
- Machining: High-carbon
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Supplementary Article/Info 2: with bolts/screws
- Brake System: Volkswagen
- Width: 146 mm
- Brake Disc Thickness: 19,6 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 145 mm
- Quantity Unit: Set
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 47857HPS
MAPCO 47857HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Front Axle
- Surface: Coated
- Brake Disc Type: Vented
- Outer diameter: 280 mm
- Brake Disc Thickness: 22 mm
- Minimum thickness: 19 mm
- Height: 36,7 mm
- Inner diameter: 133,5 mm
- Bore Ø: 15,6 mm
- Machining: High-carbon
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Supplementary Article/Info 2: with bolts/screws
- Brake System: Volkswagen
- Width: 146 mm
- Brake Disc Thickness: 19,6 mm
- Wear Warning Contact: incl. wear warning contact
- Warning Contact Length: 145 mm
- Quantity Unit: Set
- Multi-piece: Multi-piece
To the price display, please log in
Art. No . : 47858HPS
MAPCO 47858HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Outer diameter: 230 mm
- Brake Disc Thickness: 9 mm
- Minimum thickness: 7 mm
- Inner diameter: 125,8 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Brake System: Lucas / TRW
- Width: 87,6 mm
- Height: 52,9 mm
- Brake Disc Thickness: 17.2 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 2
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1KK+1KS+1KV
To the price display, please log in
Art. No . : 47858HPS
MAPCO 47858HPS BRAKE KIT
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Fitting Position: Rear Axle
- Surface: Coated
- Brake Disc Type: Solid
- Outer diameter: 230 mm
- Brake Disc Thickness: 9 mm
- Minimum thickness: 7 mm
- Inner diameter: 125,8 mm
- Bore Ø: 15,6 mm
- Number of Holes: 5
- Bolt Hole Circle Ø: 100 mm
- Centering Diameter: 65 mm
- Brake System: Lucas / TRW
- Width: 87,6 mm
- Height: 52,9 mm
- Brake Disc Thickness: 17.2 mm
- Wear Warning Contact: excl. wear warning contact
- Supplementary Article/Supplementary Info: with accessories
- Supplementary Article/Info 2: with brake caliper screws
- Number of bolts/screws: 2
- Construction year from: 1998/08
Construction year to: 2003/10
for combined PR number: 1KK+1KS+1KV
To the price display, please log in
HPS Coupling Rods (2)
Art. No . : 59852HPS
MAPCO 59852HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Left
- Length: 338,0 mm
- Thread Size: M12x1,5
- Thread Length: 21 mm
- Required quantity: 1
- Paired article numbers: 59853HPS
To the price display, please log in
Art. No . : 59853HPS
MAPCO 59853HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Right
- Length: 338,0 mm
- Thread Size: M12x1,5
- Thread Length: 21 mm
- Required quantity: 1
- Paired article numbers: 59852HPS
To the price display, please log in
HPS Wiper Blades (2)
Art. No . : 104450HPS
MAPCO 104450HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Wiper blade type: Hybrid Wiper Blade
- Quantity Unit: Piece
- Length: 450 mm
- Length: 18 in
- Construction year from: 1998/08
Construction year to: 2002/06
Fitting Position: Passenger Side
To the price display, please log in
Art. No . : 104525HPS
MAPCO 104525HPS WIPER BLADE
Manufacturer: MAPCO
Product Info:
- Quality: HPS standard
- Wiper blade type: Hybrid Wiper Blade
- Length: 525 mm
- Length: 21 in
- Quantity Unit: Piece
- Construction year from: 1998/08
Fitting Position: Driver side
To the price display, please log in
Hydraulic Filters (4)
Art. No . : 29990
MAPCO 29990 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Length: 126 mm
To the price display, please log in
Art. No . : 29990/5
MAPCO 29990/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Vehicle Equipment: for vehicles with power steering
- Flange Ø: 10,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
To the price display, please log in
Art. No . : 29991
MAPCO 29991 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Art. No . : 29991/5
MAPCO 29991/5 HYDRAULIC FILTER, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Manufacturer Restriction: Schutzfilter
- Flange Ø: 12,0 mm
- Filter type: In-Line Filter
- Specification: Magnetfilter
- Vehicle Equipment: for vehicles with power steering
To the price display, please log in
Ignition Coils & Ignition Modules (3)
Art. No . : 80880
MAPCO 80880 SWITCH UNIT, IGNITION SYSTEM
Manufacturer: MAPCO
Product Info:
- Number of pins: 4
- Required quantity: 1
- TecDoc Engine Number: 11927
To the price display, please log in
Art. No . : 80888
MAPCO 80888 IGNITION COIL
Manufacturer: MAPCO
Product Info:
- Required quantity: 1
- TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
To the price display, please log in
Art. No . : 80891
MAPCO 80891 IGNITION COIL
Manufacturer: MAPCO
Product Info:
- Number of Poles: 6
- Voltage: 12 V
- Required quantity: 1
- TecDoc Engine Number: 16419
TecDoc Engine Number: 15470
To the price display, please log in
Interior Filter (3)
Art. No . : 65202
MAPCO 65202 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Material: Paper
- Filter type: Pollen Filter
- Length: 280,0 mm
- Width: 206 mm
- Height: 25 mm
To the price display, please log in
Art. No . : 65220
MAPCO 65220 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Pollen Filter
- Material: Paper
- Length: 282 mm
- Width: 206 mm
- Height: 30 mm
To the price display, please log in
Art. No . : 67208
MAPCO 67208 FILTER, INTERIOR AIR
Manufacturer: MAPCO
Product Info:
- Filter type: Charcoal Filter
- Length: 282,0 mm
- Width: 206,0 mm
- Height: 30 mm
To the price display, please log in
Joint Kit Drive Shaft (11)
Art. No . : 16750
MAPCO 16750 JOINT KIT, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Length: 57,8 mm
- Bore Ø: 10,3 mm
- Int.teeth, diff.side, conn.to conn.shaft: 30
- Number of bores: 6
- Bolt Hole Circle Ø: 94 mm
- Joint Type: Tripod Joint
- Machined: without groove in internal component
- Joint Diameter: 72 mm
- TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
TecDoc Engine Number: 16419
Transmission Type: Fully Automatic
Fitting Position: Transmission End
Fitting Position: Front Axle
To the price display, please log in
Art. No . : 16856
MAPCO 16856 JOINT KIT, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Transmission End
- Joint Type: CV Joint
- Int. teeth, diff.side, conn.to transm.: 33
- Outer diameter: 100 mm
- Supplementary Article/Supplementary Info: with add-on material
- Number of bores: 6
- Bolt Hole Circle Ø: 86,00 mm
- Fitting Position: Front Axle Left
Transmission Type: Manual Transmission
To the price display, please log in
Art. No . : 16857
MAPCO 16857 JOINT KIT, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Joint Type: CV Joint
- Int. teeth, diff.side, conn.to transm.: 33
- Outer diameter: 100 mm
- Joint Type: Disc Joint
- Machined: without groove in internal component
- Length: 32,00 mm
- Supplementary Article/Info 2: with bolts/screws
- Thread Size: M8x1,5x47,5
- Bore Ø: 8,30 mm
- Number of bores: 6
- Bolt Hole Circle Ø: 86,00 mm
- Supplementary Article/Info 2: with rubber bellow
- New Part
- TecDoc Engine Number: 11927
TecDoc Engine Number: 10607
TecDoc Engine Number: 15470
TecDoc Engine Number: 16419
Transmission Type: Manual Transmission
Fitting Position: Transmission End
Fitting Position: Front Axle
To the price display, please log in
Art. No . : 16996
MAPCO 16996 JOINT KIT, DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Fitting Position: Wheel Side
- Thread Size: M20x1.5
- Outer gearing wheel side: 36
- Internal Teeth, wheel side: 30
- Seal Diameter: 53,0 mm
- Outer diameter: 90 mm
To the price display, please log in
Art. No . : 18978
MAPCO 18978 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: Für PKW
To the price display, please log in
Art. No . : 18979
MAPCO 18979 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- reinforced version
- Number of Parts: 4 parts
- Quality: für Transporter
To the price display, please log in
Art. No . : 18990
MAPCO 18990 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 55 mm
- Inner diameter 2 to: 90 mm
- Manufacturer Restriction: für PKW
To the price display, please log in
Art. No . : 18990/2
MAPCO 18990/2 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18990/3
MAPCO 18990/3 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
To the price display, please log in
Art. No . : 18990/6
MAPCO 18990/6 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Supplementary Article/Info 2: with clamps
To the price display, please log in
Art. No . : 18991
MAPCO 18991 MOUNTING SET, DRIVESHAFT BELLOW
Manufacturer: MAPCO
Product Info:
- Inner diameter 2 of: 90 mm
- Inner diameter 2 to: 120 mm
- Manufacturer Restriction: für Transporter
To the price display, please log in
Master Cylinder (1)
Art. No . : 1738
MAPCO 1738 MASTER CYLINDER, BRAKES
Manufacturer: MAPCO
Product Info:
- Brake System: Bosch
- Diameter: 23.8 mm
- Number of connectors: 2
- Thread Size 1: M 12 x 1
- Supplementary Article/Info 2: without brake fluid reservoir
- Construction year from: 1998/08
Construction year to: 2003/10
Left-/right-hand drive vehicles: for left-hand drive vehicles
To the price display, please log in
Oil Filter (3)
Art. No . : 61096
MAPCO 61096 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Filter type: Spin-on Filter
- Seal Diameter: 72 mm
- Outer diameter: 76 mm
- Height: 120,0 mm
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 2,5 bar
To the price display, please log in
Art. No . : 61096/10
MAPCO 61096/10 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Multi-piece
- Required quantity: 1
- Filter type: Spin-on Filter
- Seal Diameter: 72 mm
- Outer diameter: 76 mm
- Height: 120,0 mm
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 2,5 bar
To the price display, please log in
Art. No . : 61096/5
MAPCO 61096/5 OIL FILTER
Manufacturer: MAPCO
Product Info:
- Multi-piece: Multi-piece
- Quantity Unit: Set
- Filter type: Spin-on Filter
- Seal Diameter: 72 mm
- Outer diameter: 76 mm
- Height: 120,0 mm
- Thread Size: 3/4-16 UNF
- Bypass Valve Opening Pressure: 2,5 bar
- Supplementary Article/Supplementary Info: with oil drain plug
To the price display, please log in
Power Steering Pumps (3)
Art. No . : 27830
MAPCO 27830 HYDRAULIC PUMP, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- New part without deposit
- Operating Mode: Hydraulic
- Manufacturer Restriction: ZF
- Pump Type: Vane Pump
- Hub Profile: VW 3-loch
- Hub Length: 41,0 mm
- Pressure: 90 bar
- Left-/right-hand drive vehicles: for left-hand/right-hand drive vehicles
To the price display, please log in
Art. No . : 27830/2
MAPCO 27830/2 HYDRAULIC PUMP, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Operating Mode: Hydraulic
- Supplementary Article/Info 2: with belt
- Driven Units: Driven unit: alternator
Vehicle Equipment: for vehicles with air conditioning
To the price display, please log in
Art. No . : 27830/3
MAPCO 27830/3 HYDRAULIC PUMP, STEERING SYSTEM
Manufacturer: MAPCO
Product Info:
- Operating Mode: Hydraulic
- Supplementary Article/Info 2: with belt
- Pulleys: without v-ribbed belt pulley
- Driven Units: Driven unit: alternator
Vehicle Equipment: for vehicles without air conditioning
To the price display, please log in
Repair Kit Stabilizer Suspension (2)
Art. No . : 33824/2
MAPCO 33824/2 REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Inner diameter: 21 mm
- Supplementary Article/Info 2: with rubber mounting
- Supplementary Article/Info 2: with clamps
- Required quantity: 1
To the price display, please log in
Art. No . : 36787/2
MAPCO 36787/2 REPAIR KIT, STABILIZER SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Inner diameter: 19 mm
- Supplementary Article/Info 2: with rubber mounting
- Supplementary Article/Info 2: with clamps
- Required quantity: 1
To the price display, please log in
Rod Strut Stabiliser (7)
Art. No . : 49867
MAPCO 49867 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Material: Steel
- Length: 105,0 mm
- Inner diameter: 10 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Vehicle Identification Number to: 1J-1-480 000
To the price display, please log in
Art. No . : 49868
MAPCO 49868 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Material: Plastic
- Length: 105 mm
- Inner diameter: 10,0 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Vehicle Identification Number to: 1J-1-480 000
To the price display, please log in
Art. No . : 51750
MAPCO 51750 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Length: 105 mm
- Stabiliser Diameter: 23 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Vehicle Identification Number from: 1J-1-480 001
To the price display, please log in
Art. No . : 53867
MAPCO 53867 REPAIR KIT, STABILISER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Material: Steel
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 105 mm
- Stabiliser Diameter: 23,0 mm
- Required quantity: 1
- Vehicle Identification Number to: 1J-1-480 000
To the price display, please log in
Art. No . : 53868
MAPCO 53868 REPAIR KIT, STABILISER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Rod/Strut: Coupling Rod
- Material: Plastic
- Fitting Position: Front Axle
- Length: 105 mm
- Stabiliser Diameter: 21,0 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 59852HPS
MAPCO 59852HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Left
- Length: 338,0 mm
- Thread Size: M12x1,5
- Thread Length: 21 mm
- Required quantity: 1
- Paired article numbers: 59853HPS
To the price display, please log in
Art. No . : 59853HPS
MAPCO 59853HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Right
- Length: 338,0 mm
- Thread Size: M12x1,5
- Thread Length: 21 mm
- Required quantity: 1
- Paired article numbers: 59852HPS
To the price display, please log in
Rubber Pad Trolley Jack & Lifting Platforms (1)
Art. No . : 39999
MAPCO 39999 SUPPORT PLATE, MOBILE JACK
Manufacturer: MAPCO
Product Info:
- Material: Elastomer
- Outer diameter: 65 mm
- Height: 25 mm
To the price display, please log in
Screw Nuts Small Parts (3)
Art. No . : 26754/9
MAPCO 26754/9 SCREW
Manufacturer: MAPCO
Product Info:
- Length: 72 mm
- External Thread: M16 x 1,5 mm
- Quality/ Grade: 8.8
- Bolt Head-/Nut Design: Hexagon Socket
- Fitting Position: Front Axle
To the price display, please log in
Art. No . : 95983
MAPCO 95983 BOLT, PROPSHAFT FLANGE
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Slim Set
- Multi-piece: Multi-piece
- Material: Steel
- Length: 57 mm
- Thread Length: 46 mm
- Quality/ Grade: 12.9
- Bolt Head-/Nut Design: Female Star
- Required quantity: 1
- Transmission Type: Manual Transmission
Fitting Position: Front
To the price display, please log in
Art. No . : 95983/2
MAPCO 95983/2 BOLT, PROPSHAFT FLANGE
Manufacturer: MAPCO
Product Info:
- Full Set
- Multi-piece: Multi-piece
- Material: Steel
- Length: 57 mm
- Thread Length: 46 mm
- Quality/ Grade: 12.9
- Bolt Head-/Nut Design: Female Star
- Transmission Type: Manual Transmission
Fitting Position: Front Axle left and right
To the price display, please log in
Sealing Plug Oil Sump & Kits (3)
Art. No . : 95954
MAPCO 95954 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with seal ring
- Spanner Size: 19
- Length: 29,5 mm
- Thread Length: 18 mm
- External Thread: M14 x 1,5 mm
To the price display, please log in
Art. No . : 95954/10
MAPCO 95954/10 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Number of Parts: 10 parts
- Length: 29,5 mm
- Thread Length: 18 mm
- External Thread: M14 x 1,5 mm
- Spanner Size: 19
- Supplementary Article/Info 2: with seal ring
To the price display, please log in
Art. No . : 95954/5
MAPCO 95954/5 SEALING PLUG, OIL SUMP
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Multi-piece: Five-piece
- Supplementary Article/Info 2: with seal ring
- Length: 29,5 mm
- Thread Length: 18 mm
- External Thread: M14 x 1,5 mm
- Spanner Size: 19
To the price display, please log in
Sensor Coolant Temperature (3)
Art. No . : 88800
MAPCO 88800 SENDER UNIT, COOLANT TEMPERATURE
Manufacturer: MAPCO
Product Info:
- Housing Diameter: 20,0 mm
- Colour: Grey
- Number of connectors: 2,0
To the price display, please log in
Art. No . : 88801
MAPCO 88801 SENDER UNIT, COOLANT TEMPERATURE
Manufacturer: MAPCO
Product Info:
- Housing Diameter: 20,0 mm
- Colour: Green
- Number of connectors: 4
To the price display, please log in
Art. No . : 88807
MAPCO 88807 SENDER UNIT, COOLANT TEMPERATURE
Manufacturer: MAPCO
Product Info:
- Housing Diameter: 20,0 mm
- Colour: Green
- Number of connectors: 4,0
- Supplementary Article/Supplementary Info: with seal
- TecDoc Engine Number: 10607
Vehicle Identification Number to: 1J-X-250 000
---------
TecDoc Engine Number: 11927
Vehicle Identification Number to: 1J-X-250 000
To the price display, please log in
Shock Absorbers (8)
Art. No . : 140913
MAPCO 140913 MOUNTING KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Shock Absorber Type: Gas Pressure
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye
- Shock Absorber Mounting Type: Top pin
- Supplementary Article/Info 2: with suspension strut support mount
- Supplementary Article/Info 2: with protective cap/bellow
- Construction year to: 2003/10
Suspension: for vehicles with standard suspension
To the price display, please log in
Art. No . : 20750
MAPCO 20750 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Replace in pairs only
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Suspension Strut
- Suspension: for vehicles with standard suspension
To the price display, please log in
Art. No . : 20804
MAPCO 20804 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Construction year to: 2003/10
---------
Construction year from: 2003/10
Suspension: for vehicles with off-road suspension
To the price display, please log in
Art. No . : 20804/2
MAPCO 20804/2 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
To the price display, please log in
Art. No . : 20805
MAPCO 20805 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Fitting Position: Rear Axle
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber Mounting Type: Bottom eye
- Shock Absorber Mounting Type: Top pin
- Replace in pairs only
- Construction year to: 2003/10
Suspension: for vehicles with standard suspension
To the price display, please log in
Art. No . : 20805/2
MAPCO 20805/2 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Set
- Fitting Position: Rear Axle
- Shock Absorber Design: Spring-bearing Damper
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Shock Absorber Mounting Type: Bottom eye
- Required quantity: 1
- Construction year to: 2003/10
Suspension: for vehicles with standard suspension
To the price display, please log in
Art. No . : 40904
MAPCO 40904 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Shock Absorber Type: Gas Pressure
- Quantity Unit: Set
- Fitting Position: Front Axle
- Fitting Position: Rear Axle
- Shock Absorber Design: Suspension Strut
- Supplementary Article/Info 2: with suspension strut support mount
- Supplementary Article/Info 2: with rolling bearing
- Supplementary Article/Info 2: with protective cap/bellow
- Shock Absorber System: Twin-Tube
- Required quantity: 1
- Construction year to: 2003/10
---------
Construction year from: 2003/10
Suspension: for vehicles with off-road suspension
To the price display, please log in
Art. No . : 40905
MAPCO 40905 SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Shock Absorber Type: Gas Pressure
- Fitting Position: Front Axle
- Fitting Position: Rear Axle
- Shock Absorber Design: Suspension Strut
- Shock Absorber System: Twin-Tube
- Shock Absorber Mounting Type: Top pin
- Required quantity: 1
- Construction year to: 2003/10
---------
Construction year from: 2003/10
Suspension: for vehicles with off-road suspension
To the price display, please log in
Special Parts by MAPCO (3)
Art. No . : 16756HPS
MAPCO 16756HPS DRIVE SHAFT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Length: 815 mm
- Thread Size: M20x1.5
- Outer gearing wheel side: 36
- Seal Diameter: 53 mm
- Wheel-side joint diameter: 90 mm
- Transmission-side joint diameter: 100 mm
- Bore Ø: 8.2 mm
- Number of bores: 6
- Bolt Hole Circle Ø: 86 mm
- for shaft diameter: 27 mm
- Suspension: for vehicles with lowered suspension
- Quality: HPS standard
To the price display, please log in
Art. No . : 46720/112
MAPCO 46720/112 WHEEL HUB
Manufacturer: MAPCO
Product Info:
- Rim Hole Number: 5
- Fitting Position: Rear Axle left and right
- Width: 63.5 mm
- Thread Size: M14x1.5-7H
- Registration Type: Compulsory Registration
- Inner diameter: 30 mm
- Bolt Hole Circle Ø: 112 mm
- Outer diameter 1: 57 mm
- Outer diameter 2: 132.2 mm
To the price display, please log in
Art. No . : 46737/112
MAPCO 46737/112 WHEEL HUB
Manufacturer: MAPCO
Product Info:
- Rim Hole Number: 5
- Thread Size: M14x1,5
- Registration Type: Compulsory Registration
- Bolt Hole Circle Ø: 112,0 mm
- Supplementary Article/Info 2: with ABS sensor ring
- Fitting Position: Front Axle left and right
To the price display, please log in
Spring Repair Kit Drum Brakes (4)
Art. No . : 9020
MAPCO 9020 SPLASH PANEL, BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
To the price display, please log in
Art. No . : 9021
MAPCO 9021 SPLASH PANEL, BRAKE DISC
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 9311
MAPCO 9311 ACCESSORY KIT, DISC BRAKE PADS
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle
- Brake System: LUCAS
To the price display, please log in
Art. No . : 9379
MAPCO 9379 ACCESSORY KIT, DISC BRAKE PADS
Manufacturer: MAPCO
Product Info:
- Brake System: Lucas / TRW
- Fitting Position: Rear Axle
- Construction year from: 1998/08
Construction year to: 2003/10
for PR number: 1KY
To the price display, please log in
Starter (2)
Art. No . : 13872
MAPCO 13872 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12 V
- Rated Power: 1,1 kW
- Number of Teeth: 9
- Plug Type ID: 30, 50 (Jet)
- Bore Ø: 12,5 mm
- Position / Degree: li 40
- Rotation Direction: Anticlockwise rotation
- Flange Ø: 76,2 mm
- Number of mounting bores: 2
- Transmission Type: Fully Automatic
To the price display, please log in
Art. No . : 13880
MAPCO 13880 STARTER
Manufacturer: MAPCO
Product Info:
- Voltage: 12 V
- Number of Teeth: 10
- Rated Power: 1,1 kW
- Plug Type ID: 30, 50 (Jet)
- Bore Ø: 12,5 mm
- Position / Degree: li 42
- Rotation Direction: Anticlockwise rotation
- Flange Ø: 76,2 mm
- Number of mounting bores: 2
- Used part return not required
- Construction year from: 1998/08
TecDoc Engine Number: 11927
To the price display, please log in
Starter Battery (1)
Art. No . : 105077
MAPCO 105077 STARTER BATTERY
Manufacturer: MAPCO
Product Info:
- Voltage: 12 V
- Battery Capacity: 77 Ah
- Cold-test Current, EN: 770 A
- Length: 276 mm
- Width: 175 mm
- Height: 175 mm
- Hold-down Type: B13
- TecDoc Engine Number: 10607
TecDoc Engine Number: 11927
TecDoc Engine Number: 15470
TecDoc Engine Number: 16419
Construction year from: 1998/08
To the price display, please log in
Starters Alternators (2)
Art. No . : 13872
MAPCO 13872 STARTER
Manufacturer: MAPCO
Product Info:
- Used part return not required
- Voltage: 12 V
- Rated Power: 1,1 kW
- Number of Teeth: 9
- Plug Type ID: 30, 50 (Jet)
- Bore Ø: 12,5 mm
- Position / Degree: li 40
- Rotation Direction: Anticlockwise rotation
- Flange Ø: 76,2 mm
- Number of mounting bores: 2
- Transmission Type: Fully Automatic
To the price display, please log in
Art. No . : 13880
MAPCO 13880 STARTER
Manufacturer: MAPCO
Product Info:
- Voltage: 12 V
- Number of Teeth: 10
- Rated Power: 1,1 kW
- Plug Type ID: 30, 50 (Jet)
- Bore Ø: 12,5 mm
- Position / Degree: li 42
- Rotation Direction: Anticlockwise rotation
- Flange Ø: 76,2 mm
- Number of mounting bores: 2
- Used part return not required
- Construction year from: 1998/08
TecDoc Engine Number: 11927
To the price display, please log in
Steering & Suspension Parts (30)
Art. No . : 49690
MAPCO 49690 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Required quantity: 1
- Paired article numbers: 49691
To the price display, please log in
Art. No . : 49690/1
MAPCO 49690/1 INNER TIE ROD END
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Axle Joint Length: 340 mm
- External Thread: M16x1,5 mm
- External Thread: M14x1,5 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 49691
MAPCO 49691 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Required quantity: 1
- Paired article numbers: 49690
To the price display, please log in
Art. No . : 49700
MAPCO 49700 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Length: 94,0 mm
- Internal Thread: M14x1,5 mm
- External Thread: M12x1,5 mm
- Cone Size: 13.2 mm
- Paired article numbers: 49701
- Required quantity: 1
- Fitting Position: Front Axle Left
To the price display, please log in
Art. No . : 49701
MAPCO 49701 TIE ROD END
Manufacturer: MAPCO
Product Info:
- Length: 94,0 mm
- Internal Thread: M14x1,5 mm
- External Thread: M12x1,5 mm
- Cone Size: 13.2 mm
- Paired article numbers: 49700
- Required quantity: 1
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 49702
MAPCO 49702 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Supplementary Article/Supplementary Info: without add-on material
- Required quantity: 1
- Paired article numbers: 49703
To the price display, please log in
Art. No . : 49702/1
MAPCO 49702/1 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with fastening material
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Thread Size: M12x1,5
- Paired article numbers: 49703/1
- Required quantity: 1
To the price display, please log in
Art. No . : 49703
MAPCO 49703 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Supplementary Article/Supplementary Info: without add-on material
- Required quantity: 1
- Paired article numbers: 49702
To the price display, please log in
Art. No . : 49703/1
MAPCO 49703/1 BALL JOINT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with fastening material
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Thread Size: M12x1,5
- Paired article numbers: 49702/1
- Required quantity: 1
To the price display, please log in
Art. No . : 49704
MAPCO 49704 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Lower
- Control/Trailing Arm Type: Control Arm
- Material: Sheet Steel
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 49704/1
MAPCO 49704/1 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Material: Sheet Steel
- Required quantity: 1
- Paired article numbers: 49704/2
To the price display, please log in
Art. No . : 49704/2
MAPCO 49704/2 CONTROL ARM
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Material: Sheet Steel
- Required quantity: 1
- Paired article numbers: 49704/1
To the price display, please log in
Art. No . : 49867
MAPCO 49867 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Material: Steel
- Length: 105,0 mm
- Inner diameter: 10 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Vehicle Identification Number to: 1J-1-480 000
To the price display, please log in
Art. No . : 49868
MAPCO 49868 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Material: Plastic
- Length: 105 mm
- Inner diameter: 10,0 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Vehicle Identification Number to: 1J-1-480 000
To the price display, please log in
Art. No . : 49869
MAPCO 49869 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Vehicle Equipment: for vehicles with power steering
- Paired article numbers: 49870
- Required quantity: 1
- Construction Year: 1998/01
Vehicle Identification Number to: 1J-WP 050 832...
To the price display, please log in
Art. No . : 49870
MAPCO 49870 ROD ASSEMBLY
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Right
- Vehicle Equipment: for vehicles with power steering
- Paired article numbers: 49869
- Required quantity: 1
- Construction Year: 1998/01
Vehicle Identification Number to: 1J-WP 050 832...
To the price display, please log in
Art. No . : 51750
MAPCO 51750 ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Length: 105 mm
- Stabiliser Diameter: 23 mm
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Vehicle Identification Number from: 1J-1-480 001
To the price display, please log in
Art. No . : 53282
MAPCO 53282 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with lock screw set
- Fitting Position: Front Axle Left
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Supplementary Article/Info 2: with rubber mounting
- Paired article numbers: 53283
- Required quantity: 1
To the price display, please log in
Art. No . : 53283
MAPCO 53283 SUSPENSION KIT
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: with lock screw set
- Fitting Position: Front Axle Right
- Fitting Position: Lower
- Supplementary Article/Info 2: with ball joint
- Supplementary Article/Info 2: with rubber mounting
- Paired article numbers: 53282
- Required quantity: 1
To the price display, please log in
Art. No . : 53704
MAPCO 53704 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with lock screw set
- Fitting Position: Front Axle left and right
- Fitting Position: Lower
- Required quantity: 1
To the price display, please log in
Art. No . : 53704/1
MAPCO 53704/1 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with lock screw set
- Fitting Position: Front Axle left and right
- Fitting Position: Lower
- Supplementary Article/Info 2: with coupling rod
- Required quantity: 1
To the price display, please log in
Art. No . : 53704/2
MAPCO 53704/2 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with lock screw set
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with coupling rod
- Steering: with tie rod ends
- Supplementary Article/Info 2: with axle joint
- Required quantity: 1
To the price display, please log in
Art. No . : 53844
MAPCO 53844 REPAIR KIT, TIE ROD
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with steering bellows
- Supplementary Article/Info 2: with clamps
- Required quantity: 1
To the price display, please log in
Art. No . : 53867
MAPCO 53867 REPAIR KIT, STABILISER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Rod/Strut: Coupling Rod
- Quantity Unit: Set
- Material: Steel
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Length: 105 mm
- Stabiliser Diameter: 23,0 mm
- Required quantity: 1
- Vehicle Identification Number to: 1J-1-480 000
To the price display, please log in
Art. No . : 53868
MAPCO 53868 REPAIR KIT, STABILISER COUPLING ROD
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Rod/Strut: Coupling Rod
- Material: Plastic
- Fitting Position: Front Axle
- Length: 105 mm
- Stabiliser Diameter: 21,0 mm
- Required quantity: 1
To the price display, please log in
Art. No . : 53966
MAPCO 53966 LINK SET, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle
- Control/Trailing Arm Type: Control Arm
- Supplementary Article/Info 2: with ball joint
- Supplementary Article/Info 2: with rubber mounting
- Supplementary Article/Info 2: with carrier frame
- Required quantity: 1
To the price display, please log in
Art. No . : 54767
MAPCO 54767 SUPPORT FRAME, ENGINE CARRIER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
To the price display, please log in
Art. No . : 59852HPS
MAPCO 59852HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Left
- Length: 338,0 mm
- Thread Size: M12x1,5
- Thread Length: 21 mm
- Required quantity: 1
- Paired article numbers: 59853HPS
To the price display, please log in
Art. No . : 59853HPS
MAPCO 59853HPS ROD/STRUT, STABILISER
Manufacturer: MAPCO
Product Info:
- reinforced version
- Quality: HPS standard
- Rod/Strut: Coupling Rod
- Fitting Position: Front Axle Right
- Length: 338,0 mm
- Thread Size: M12x1,5
- Thread Length: 21 mm
- Required quantity: 1
- Paired article numbers: 59852HPS
To the price display, please log in
Art. No . : 95704
MAPCO 95704 MOUNTING KIT, CONTROL LEVER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle
- Control/Trailing Arm Type: for control arm
- Required quantity: 1
To the price display, please log in
Steering Gears (3)
Art. No . : 29806
MAPCO 29806 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- New Part
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Operating Mode: Hydraulic
- Manufacturer Restriction: ZF
- Input shaft connector type: Splined
- Number of splines on input shaft: 22
- Length: 1260 mm
- Steering: with tie rod ends
To the price display, please log in
Art. No . : 29806/1
MAPCO 29806/1 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- New Part
- Operating Mode: Hydraulic
- Manufacturer Restriction: ZF
- Length: 623 mm
- Connector type: verzahnt, Zähnez.:22
- Left-/right-hand drive vehicles: for left-hand drive vehicles
To the price display, please log in
Art. No . : 29806/9
MAPCO 29806/9 STEERING GEAR
Manufacturer: MAPCO
Product Info:
- Generally overhauled
- Left-/right-hand drive vehicles: for left-hand drive vehicles
- Manufacturer Restriction: ZF
- Operating Mode: Hydraulic
- Supplementary Article/Info 2: with axle joint
- Length: 1260 mm
- Vehicle Identification Number from: 1J-WP050 833
---------
Vehicle Identification Number from: 1J-WD039 151
---------
Vehicle Identification Number from: 1J-WB027 485
---------
Vehicle Identification Number from: 1J-WW062 360
To the price display, please log in
Strut Mounts & Kits (22)
Art. No . : 32816
MAPCO 32816 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Replace in pairs only
- Fitting Position: Front Axle left and right
- Outer diameter: 50 mm
- Height: 63 mm
- Inner diameter 1: 18 mm
- Inner diameter 2 to: 22 mm
- Required quantity: 2
To the price display, please log in
Art. No . : 32817
MAPCO 32817 PROTECTIVE CAP/BELLOW, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Fitting Position: Upper
- Height: 225,0 mm
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 32829
MAPCO 32829 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Height: 128 mm
- Required quantity: 2
- Suspension: for vehicles without off-road suspension
- Suspension: for vehicles without sports suspension
- Replace in pairs only
To the price display, please log in
Art. No . : 32829/2
MAPCO 32829/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Rear Axle left and right
- Height: 128 mm
- Suspension: for vehicles without off-road suspension
- Suspension: for vehicles without sports suspension
- Required quantity: 1
- Replace in pairs only
To the price display, please log in
Art. No . : 32833
MAPCO 32833 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Rear Axle left and right
- Fitting Position: Upper
- Height: 38,9 mm
- Outer diameter: 75 mm
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 32884
MAPCO 32884 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Height: 53 mm
- Required quantity: 2
- Suspension: for vehicles with sports suspension
- Replace in pairs only
To the price display, please log in
Art. No . : 32884/2
MAPCO 32884/2 RUBBER BUFFER, SUSPENSION
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle
- Height: 53 mm
- Required quantity: 2
- Suspension: for vehicles with sports suspension
- Required quantity: 1
To the price display, please log in
Art. No . : 33832/4
MAPCO 33832/4 REPAIR KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle left and right
- Supplementary Article/Info 2: with ball bearing
- Supplementary Article/Info 2: with mounting sleeves
- Required quantity: 1
To the price display, please log in
Art. No . : 33856
MAPCO 33856 ANTI-FRICTION BEARING, SUSPENSION STRUT SUPPORT MOUNTING
Manufacturer: MAPCO
Product Info:
- Bearing Type: Angular Ball Bearing
- Fitting Position: Front Axle left and right
- Inner diameter: 14,0 mm
- Outer diameter: 45,0 mm
- Required quantity: 2
- Replace in pairs only
To the price display, please log in
Art. No . : 33911
MAPCO 33911 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Replace in pairs only
- Material: Steel Elastomer
- Supplementary Article/Info 2: without ball bearing
- Required quantity: 2
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Suspension: for vehicles with off-road suspension
To the price display, please log in
Art. No . : 33911/2
MAPCO 33911/2 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Rear Axle
- Material: Steel Elastomer
- Supplementary Article/Info 2: without ball bearing
- Required quantity: 1
- Suspension: for vehicles with off-road suspension
To the price display, please log in
Art. No . : 33961
MAPCO 33961 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Material: Steel Elastomer
- Supplementary Article/Info 2: without ball bearing
- Inner diameter: 26 mm
- Outer diameter: 83 mm
- Replace in pairs only
- Required quantity: 2
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
To the price display, please log in
Art. No . : 33969
MAPCO 33969 TOP STRUT MOUNTING
Manufacturer: MAPCO
Product Info:
- Supplementary Article/Info 2: without ball bearing
- Required quantity: 2
- Replace in pairs only
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Vehicle Identification Number from: 1J-Y-500 001
Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 34369
MAPCO 34369 REPAIR KIT
Manufacturer: MAPCO
Product Info:
- Number of Parts: 6 parts
- Fitting Position: Rear Axle
- Material: Steel Elastomer
- Supplementary Article/Info 2: without ball bearing
- Supplementary Article/Info 2: with protective cap/bellow
- Required quantity: 1
- Suspension: for vehicles with off-road suspension
To the price display, please log in
Art. No . : 34810
MAPCO 34810 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Number of Parts: 2 parts
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with protective cap/bellow
- Required quantity: 2
To the price display, please log in
Art. No . : 34810/2
MAPCO 34810/2 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Number of Parts: 4 parts
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with protective cap/bellow
- Required quantity: 1
To the price display, please log in
Art. No . : 34816/2
MAPCO 34816/2 DUST COVER KIT, SHOCK ABSORBER
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Shape: round
- Fitting Position: Rear Axle Left
- Fitting Position: Rear Axle Right
- Required quantity: 1
- Number of Parts: 4 parts
- Quantity per axle: 1
To the price display, please log in
Art. No . : 34853
MAPCO 34853 REPAIR KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: with rolling bearing
- Quantity per axle: 2
To the price display, please log in
Art. No . : 34853/2
MAPCO 34853/2 REPAIR KIT
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Fitting Position: Front Axle Right
- Fitting Position: Upper
- Supplementary Article/Info 2: with rolling bearing
- Quantity per axle: 1
To the price display, please log in
Art. No . : 34853/3
MAPCO 34853/3 MOUNTING, SHOCK ABSORBERS
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle
- Fitting Position: Rear Axle
- Supplementary Article/Info 2: with suspension strut support mount
- Supplementary Article/Info 2: with protective cap/bellow
- Required quantity: 1
- Vehicle Identification Number from: 1J-Y-500 001
Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 34853/4
MAPCO 34853/4 MOUNTING, SHOCK ABSORBERS
Manufacturer: MAPCO
Product Info:
- Quantity Unit: Set
- Fitting Position: Front Axle
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: with spring seat
- Supplementary Article/Info 2: with suspension strut support mount
- Supplementary Article/Info 2: with protective cap/bellow
- Required quantity: 1
- Vehicle Identification Number from: 1J-Y-500 001
Suspension: for vehicles with sports suspension
To the price display, please log in
Art. No . : 36957
MAPCO 36957 SPRING SEAT
Manufacturer: MAPCO
Product Info:
- Replace in pairs only
- Fitting Position: Front Axle
- Fitting Position: Upper
- Inner diameter: 22 mm
- Supplementary Article/Info 2: without ball bearing
- Required quantity: 2
To the price display, please log in
Stub Axle Wheel Suspension (5)
Art. No . : 107755
MAPCO 107755 STUB AXLE, WHEEL SUSPENSION
Manufacturer: MAPCO
Product Info:
- Fitting Position: Front Axle Left
- Paired article numbers: 107756
- Required quantity: 1
To the price display, please log in
Art. No . : 107755/4
MAPCO 107755/4 REPAIR KIT, STUB AXLE
Manufacturer: MAPCO
Product Info:
- Manufacturer Approval: montiert/assembled